Mubychem Group, established in 1976, is the pioneer manufacturer of Hexyl Cinnamic Aldehyde, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP.
Hexyl Cinnamic Aldehyde α Hexyl cinnamaldehyde Manufacturers MSDS Sheet
Hexyl Cinnamic Aldehyde
CAS No.101-86-0; EINECS No. 202-983-3; Fema No. 2569
Hexyl Cinnamaldehyde, Molecular Weight 216.32, Molecular Formula C15H20O
Synonyms: α-n Hexyl Cinnamic Aldehyde, α-Hexyl cinnamaidehyde; α-n-Hexyl-β-Phenylacrolein; AHCA; HCA
EINECS Number: 202-983-3
HS Number: 2912290000
Molecular Weight: 216.32
Molecular Formula: C15H20O
Odor Profile: Floral, Jasmin, Waxy
Olfactory Description: Similar to alpha amyl cinnamic aldehyde but with a finer, more floral and delicate character.
Visual Description: Clear yellow liquid
GC Analysis ------------- Min --- Max
trans isomer ------------ 90% --- 95%
cis isomer -------------- 3% ---- 8.5%
cis + trans isomers ----- 95%
Acid Value (mg KOH/gm) -- 0 ----- 0.5
Flashpoint (closed cup) - > 100C
USES: Very extensively used in perfumes where it produces a jasmine-like floral when accompanied by more volatile chemicals of floral character. Blends easily and assists in fixation of the fragrance. It is also used in Soap, Acid Cleaner Liquid, Detergent, Alcoholic Lotion, Fabric Softener, Anti Perspirant, Foam Bath, Hard Surface Cleaner, Deo Stick, Shampoo, Bleach.
Hexyl Cinnamic Aldehyde, α Hexyl cinnamaidehyde MSDS Sheet
Material Safety Data Sheet
1 - Product Identification
Product name: Hexyl Cinnamic Aldehyde
2 - Composition / information on ingredients
Chemical Name: alpha-hexylcinnamaldehyde
CAS Number 101-86-0
3 - Hazards identification
Acute health effects: May be harmful if swallowed. May cause skin sensitization. May cause eye and skin irritation. Inhalation may cause irritation of the respiratory tract and mucous membranes. Repeated or prolonged skin contact may cause irritation.
Chronic health effects: May cause skin sensitization.
Routes of exposure/entry Skin Contact, Inhalation, Ingestion, Eye Contact
Target organs: Eyes, Gastrointestinal tract, Respiratory tract, Skin
Carcinogenic status: Not listed or regulated by IARC, NTP, OSHA, or ACGIH.
Reproductive effects: None Expected
4 - First aid measures
Eye contact: Immediately flush eyes with plenty of clean water for an extended time, not less than five (5) minutes. Flush longer if there is any indication of residual chemical in the eye. Ensure adequate flushing of the eyes by separating the eyelids with fingers and roll eyes in a circular motion.
Skin contact: Immediately remove contaminated clothing and shoes. Wash the affected area with plenty of soap and water until no evidence of the chemical remains. Launder clothing before reuse. If irritation develops, call a physician.
Inhalation: If affected, remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Ingestion: Do not induce vomiting. Rinse out the mouth with water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
5 - Fire fighting measures
NFPA flammability class: IIIB
Flash point: >212 °F (>100 °C) in Tag Closed Cup
Fire and explosive properties: Combustible liquid will burn at high temperatures.
Extinguishing media: NFPA Class IIIB (Combustible liquid): Use water spray, ABC dry chemical, foam or carbon dioxide. Water or foam may cause frothing. Use water to keep fire-exposed containers cool. Water spray may be used to flush spills away from exposures.
Fire fighting instructions: Wear self-contained breathing apparatus (SCBA) equipped with a full facepiece and operated in a pressure-demand mode (or other positive pressure mode) and approved protective clothing. Personnel without suitable respiratory protection must leave the area to prevent significant exposure to hazardous gases from combustion, burning or decomposition. In an enclosed or poorly ventilated area, wear SCBA during cleanup immediately after a fire as well as during the attack phase of firefighting operations.
Unusual fire/explosion hazards: Irritating or toxic substances may be emitted upon burning, combustion or decomposition.
6 - Accidental release measures
Containment techniques: Prevent entry into sewers and waterways. Contain by diking with sand, earth or other non-combustible material. If spilled in an enclosed area, ventilate.
Clean-up techniques: Wear proper personal protective clothing and equipment. Do not flush liquid into public sewer, water systems or surface waters. Eliminate ignition sources. Soak up large spill residue and small spills with an inert absorbent. Place into labeled, closed container; store in safe location to await disposal. Change contaminated clothing and launder before reuse. Personal Protective Equipment must be worn.
7 - Handling and storage
Handling: Do not cut, puncture, or weld on or near the container. Wash thoroughly after handling this product. Always wash up before eating, smoking or using the facilities. Use under well-ventilated conditions. Avoid eye and skin contact. Avoid inhalation of aerosol, mist, spray, fume or vapor. Avoid drinking, tasting, swallowing or ingesting this product. Provide eyewash fountains and safety showers in the work area.
Storage: Empy container contains residual product which may exhibit hazards of product. Store cool and dry, under well-ventilated conditions. Do not store in open, unlabeled or mislabeled containers. Keep container closed when not in use. Product can easily oxidize. It is recommended that opened containers be padded with nitrogen. Keep away from heat, sparks and open flames.
8 - Exposure controls / personal protection
Engineering controls: Always provide effective general and, when necessary, local exhaust ventilation to draw fumes, vapors and/or dust away from workers to prevent routine inhalation. Ventilation must be adequate to maintain the ambient workplace atmosphere below the exposure limit(s). (Ventilation guidelines/techniques may be found in publications such as Industrial Ventilation: American Conference of Governmental Industrial Hygienists, 1330 Kemper Meadow Drive, Cincinnati, OH, 45240-1634, USA.)
Eye/face protection: Safety glasses or goggles required.
Skin protection: Wear chemical resistant (impervious) gloves. Wear long sleeve shirt and trousers and other equipment as needed to avoid skin contact.
Respiratory protection: Wear an approved respirator (e.g., an organic vapor respirator, a full face air purifying respirator for organic vapors, or a self-contained breathing apparatus) whenever exposure to aerosol, mist, spray, fume or vapor exceed the exposure limit(s) of any chemical substance listed in this MSDS. Use respirator in accordance with manufacturer's use limitations and OSHA standard 1910.134 (29CFR).
9 - Physical and chemical properties
pH: Not Available
Appearance Pale yellow
% Volatile by weight: 100%
Specific gravity: 0.95 - 0.96 (25C)
Solubility in water: Negligible
Evaporation rate: < 0.01
Vapor pressure: <0.02 mm Hg @20C
Boiling point F: 581F
Boiling point C: 305C
Melting point: 4C (39F)
10 - Stability and reactivity
Stability: This product is stable.
Hazardous polymerization: Hazardous polymerization will not occur.
Conditions to avoid: Excessive heat and ignition sources.
Incompatibility with other materials: Avoid contact with strong oxidizing agents.
Hazardous decomposition products: Carbon dioxide and carbon monoxide.
11 - Toxicological information
LC50 Inhalation: Not Established
LD50 Oral: 2450 mg/kg Rat/ adult
LD50 Skin: >3000 mg/kg Rabbit/ adult
12 - Ecological information
No ecological testing has been conducted on this product.
13 - Disposal information
Incinerate waste product when in liquid form (i.e., as supplied) in a properly permitted (approved) incineration facility in accordance with local regulations. Liquids cannot be disposed of in a landfill. Do not release to waterways. Wash-water should be contained and sent to a waste facility for proper handling and disposal in accordance with all applicable regulations.
14 - Transportation information
15 - Regulatory information
All components of this product are either listed on the U.S. Toxic Substances Control Act (TSCA) inventory of chemicals or are otherwise compliant with TSCA regulations.
All components in this product are on the Canadian Domestic Substances List (DSL) or are exempt from listing.
Health: 2 Flammability: 1 Reactivity: 0 Personal Protection: X
16 - Other information
Our company provides this Hexyl Cinnamic Aldehyde MSDS sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Hexyl Cinnamaldehyde MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Hexyl Cinnamaldehyde manufacturers
Hexyl Cinnamic Aldehyde manufacturers at:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: email@example.com
Copyright and Usual Disclaimer is Applicable.
Amyl Acetate Isoamyl Amyl Butyrate Isoamyl Amyl Propionate Isoamyl Isoamyl Phenylacetate Amyl Salicylate Isoamyl Benzyl Acetate Benzyl Alcohol Benzyl Benzoate Benzyl Butyrate Benzyl Formate Benzyl Isobutyrate Benzyl Propionate Benzyl Salicylate Benzyl Acetone; Benzylacetone Cinnamaldehyde Cinnamyl Nitrile Jasmafloor; Alpha Amyl Cinnamic aldehyde Schiff Base Cinnamyl Butyrate Cinnamyl Propionate Alpha Amyl Cinnamic Aldehyde Alpha Methyl Cinnamic Aldehyde Hexyl Cinnamic Aldehyde Citronellol Extra Citronellyl Acetate Citronellyl Butyrate Citronellyl Formate Citronellyl Nitrile Citronellyl Propionate Hydroxycitronellal Citral Diethylacetal Citral Extra Pure Citronellidene Acetone; Baccartol Alpha Ionone Beta Ionone Methyl Ionone Geraniol Geranyl Acetate Geranyl Butyrate Geranyl Formate Geranyl Nitrile Geranyl Propionate Phenyl Ethyl Acetate Phenyl Ethyl Salicylate Phenyl Ethyl Methyl Ether Phenyl Ethyl Propionate Phenyl Ethyl Phenyl Acetate Styrallyl Alcohol Styrallyl Propionate Styrallyl Acetate Nerolin Bromelia Skatole; 3-methylindole
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
Alpha α Hexyl Cinnamaldehyde Hexyl Cinnamic Aldehyde Exporters, Importers, Suppliers & Manufacturers