Mubychem Group, established in 1976, is the pioneer manufacturer of Aluminum Sulfate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter India Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Chemicals Container Leak Proof Drum Quick Delivery

Aluminum Sulfate USP Aluminium Sulphate BP FCC ACS Manufacturers

Aluminium Sulphate MSDS Aluminum Sulfate Manufacturers

Aluminum Sulfate
Technical & Pure; Anhydrous & Hydrate Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Aluminum Sulfate

Aluminium Sulphate BP

Aluminium Sulphate BP

DEFINITION
Aluminium sulphate contains not less than 51.0 per cent and not more than the equivalent of 59.0 percent of Al2(SO4)3. It contains a variable quantity of water of crystallization.

CHARACTERS
Colourless, lustrous crystals or crystalline masses, soluble in cold water, freely soluble in hot water, practically insoluble in alcohol.

IDENTIFICATION
A. Solution S (see Tests) gives reaction of sulphates.
B. Solution S gives the reaction of aluminium.

TESTS
Solution S
Dissolve 2.5 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is not more opalescent than reference suspension III and is  colourless.
pH
The pH of the solution is 2.5 to 4.0.
Alkali and alkaline-earth metals
To 20 ml of solution S add 100 ml of water, heat and add 0.1 ml of methyl red  solution. Add dilute ammonia until the colour of the indicator changes to  yellow. Dilute to 150 ml with water, heat to boiling and filter. Evaporate 75 ml of the  filtrate to dryness on a water-bath and ignite. The residue weighs not more than 2 mg  (0.4 per cent).
Ammonium
0.4 ml of solution S diluted to 14 ml with water complies with the limit test for  ammonium (500 ppm).
Iron
2 ml of solution S diluted to 10 ml with water complies with the limit test for iron  (100 ppm).
Heavy metals
Dilute 8 ml of solution S to 20 ml with water. 12 ml of the solution complies with  limit test A for heavy metals (50 ppm).


Aluminum Sulfate USP

Aluminum Sulfate USP
Al2(SO4)3·xH2O (anhydrous) 342.15
Sulfuric acid, aluminum salt (3:2), hydrate.
Aluminum sulfate (2:3) hydrate
Anhydrous 342.16.
Aluminum Sulfate contains not less than 54.0 percent and not more than 59.0 percent of Al2(SO4)3. It contains a varying amount of water of crystallization.
Identification— A solution (1 in 10) responds to the tests for Aluminum and for Sulfate.
pH: not less than 2.9, in a solution (1 in 20).
Water: not less than 41.0% and not more than 46.0%.
Heavy metals— The limit is 20 µg per g.
Limit of alkalies and alkaline earths— To a boiling solution of 1.0 g in 150 mL of water add a few drops of methyl red TS and then add 6 N ammonium hydroxide just until the color of the solution changes to a distinct yellow. Add hot water to restore the volume to 150 mL, and filter while hot. Evaporate 75 mL of the filtrate to dryness, and ignite to constant weight: not more than 2 mg of residue remains (0.4%).
Limit of ammonium salts— Heat 1 g with 10 mL of 1 N sodium hydroxide on a steam bath for 1 minute: the odor of ammonia is not perceptible.
Iron— To 20 mL of a solution (1 in 150) add 0.3 mL of potassium ferrocyanide TS: no blue color is produced immediately.
Organic volatile impurities: meets the requirements.


Aluminum Sulfate FCC

Aluminum Sulfate FCC
Al2(SO4)3 Formula wt, anhydrous 342.14
Al2(SO4)3·18H2O Formula wt, octadecahydrate 666.41
INS: 520 CAS: anhydrous [10043-01-3]
CAS: octadecahydrate [7784-31-8]

DESCRIPTION
Aluminum Sulfate occurs as a white powder, as shining plates, or as crystalline fragments. It is anhydrous or contains 18 molecules of water of crystallization. Because of efflorescence, the hydrate may have a composition approximating the formula Al2(SO4)3·14H2O. One gram of the hydrate dissolves in about 2 mL of water. The anhydrous approaches the same solubility, but the rate of solution is so slow that it initially appears to be relatively insoluble. The pH of a 1:20 aqueous solution is 2.9 or above.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Aluminum and for Sulfate.
Assay Anhydrous: Not less than 99.5% of Al2(SO4)3, calculated on the ignited basis.
Octadecahydrate
: Not less than 99.5% and not more than 114.0% of Al2(SO4)3·18H2O, corresponding to not more than approximately 101.7% of Al2(SO4)3·14H2O.
Alkalies and Alkaline Earths: Passes test (about 0.4%).
Ammonium Salts: Passes test.
Fluoride: Not more than 0.003%.
Lead: Not more than 3 mg/kg.
Loss on Ignition Anhydrous: Not more than 5%.
Note: This Requirement does not apply to Al2(SO4)3·18H2O.
Selenium: Not more than 0.003%.


ACS Specifications - American Chemical Society

Aluminum Sulfate, Hydrated ACS

Al2(SO4)3 . (14-18)H2O            
Aluminum Sulfate ACS
CAS Number 7784-31-8 (for 18-hydrate)

REQUIREMENTS
Assay (as the labeled hydrate) --- 98.0-102.0%
MAXIMUM ALLOWABLE
Insoluble matter--- 0.01%
Chloride (Cl)--- 0.005%
Substances not precipitated by ammonium hydroxide (as SO4)--- 0.2%
Heavy metals (as Pb)--- 0.001%
Iron (Fe)--- 0.002%

Aluminum Sulfate USP FCC Food Grade ACS, Aluminium Sulphate BP manufacturers:

MUBYCHEM GROUP
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: usa@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Isatoic Anhydride Methyl & Dimethyl Anthranilate
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux  

Aluminum Sulfate Manufacturers Aluminium Sulphate IP BP USP FCC Food Grade ACS Manufacturers

Global or International Aluminum sulfate - Aluminium Sulphate Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.