Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Zinc Chloride BP USP IP ACS Analytical Reagent Manufacturers
Zinc Chloride IP, Technical & Pure
MSDS of Zinc Chloride IP BP USP ACS Analytical Reagent Manufacturers&
ZnCl2 Solution MSDS
Zinc Chloride USP Grade Specifications
Zinc Chloride USP ZnCl2 -- 136.30
Assay— Zinc Chloride contains not less than 97.0 percent and not more than 100.5 percent of ZnCl2.
Packaging and storage— Preserve in tight containers.
Identification— A solution of it responds to the tests for Zinc and for Chloride.
Limit of oxychloride— Dissolve 1.0 g in 20 mL of water, add 20 mL of alcohol, and mix. To 10 mL of the mixture add 0.30 mL of 1.0 N hydrochloric acid: the solution becomes perfectly clear.
Sulfate— Dissolve 1.0 g in 30 mL of water: 20 mL of this solution shows no more sulfate than corresponds to 0.20 mL of 0.020 N sulfuric acid (0.03%).
Limit of ammonium salts— To 5 mL of a solution (1 in 10) add 1 N sodium hydroxide until the precipitate first formed is re-dissolved, and then warm the solution: no odor of ammonia is perceptible.
Lead— Dissolve 0.50 g in 5 mL of water, and transfer the solution to a color-comparison tube (A). Add 15 mL of Potassium Cyanide Solution (1 in 10), mix, and allow the mixture to become clear. In a similar, matched color-comparison tube (B) place 5 mL of water, and add 2.50 mL of Standard Lead Solution (see Heavy Metals 231 ) and 15 mL of Potassium Cyanide Solution (1 in 10). Add to the solution in each tube 0.1 mL of sodium sulfide TS. Mix the contents of each tube, and allow to stand for 5 minutes: viewed downward over a white surface, the solution in tube A is not darker than that in tube B (indicating not more than 0.005% of lead).
Alkalies and alkaline earths— Dissolve 2.0 g in about 150 mL of water contained in a 200-mL volumetric flask. Add sufficient ammonium sulfide TS to precipitate the zinc completely, dilute with water to volume, and mix. Filter through a dry filter, and reject the first portion of the filtrate. To 100 mL of the subsequent filtrate add 5 drops of sulfuric acid, evaporate to dryness, and ignite: the weight of the residue does not exceed 10 mg (1.0%).
Organic volatile impurities: meets the requirements
Zinc Chloride BP Ph Eur Grade Specifications
Zinc Chloride BP ZnCl2
95.0 per cent to 100.5 per cent.
White or almost white, crystalline powder or cast in white or almost white sticks, deliquescent.
Very soluble in water, freely soluble in ethanol (96 per cent) and in glycerol.
A. Dissolve 0.5 g in dilute nitric acid R and dilute to 10 ml with the same acid. The solution gives reaction of chlorides.
B 5 ml of solution S gives the reaction of zinc.
To 2.0 g add 38 ml of carbon dioxide-free water R prepared from distilled water and add dilute hydrochloric acid drop wise until dissolution is complete. Dilute to 40 ml with carbon dioxide-free water prepared from distilled water.
4.6 to 5.5.
Dissolve 1.0 g in 9 ml of carbon dioxide-free water, ignoring any slight turbidity.
Dissolve 1.5 g in 1.5 ml of carbon dioxide-free water R. The solution is not more opalescent than reference suspension. Add 7.5 ml of ethanol (96 per cent). The solution may become cloudy within 10 min. Any cloudiness disappears on the addition of 0.2 ml of dilute hydrochloric acid.
Maximum 200 ppm.
Aluminium, calcium, heavy metals, iron, magnesium
To 8 ml of solution S add 2 ml of concentrated ammonia R and shake. The solution is clear and colourless. Add 1 ml of disodium hydrogen phosphate solution. The solution remains clear for at least 5 min. Add 0.2 ml of sodium sulphide solution. A white precipitate is formed and the supernatant liquid remains colourless.
Maximum 400 ppm.
Zinc Chloride Injection USP Grade Specifications
Zinc Chloride Injection is a sterile solution of Zinc Chloride in Water for Injection. It contains not less than 90.0 percent and not more than 110.0 percent of the labeled amount of zinc (Zn).
Packaging and storage— Preserve Zinc Chloride in single-dose or multiple-dose containers, preferably of Type I or Type II glass.
Labeling— Label the Injection to indicate that it is to be diluted with Water for Injection or other suitable fluid to appropriate strength prior to administration.
Identification— The Assay preparation prepared as directed in the Assay exhibits an absorption maximum at about 213.8 nm, when determined as directed in the Assay.
Bacterial endotoxins— It contains not more than 25.0 USP Endotoxin Units per mg of zinc.
pH: between 1.5 and 2.5.
Particulate matter: meets the requirements for small-volume injections.
Other requirements— It meets the requirements under Injections 1
Zinc Chloride ACS Reagent Grade Specifications
American Chemical Society Reagent Grade
Zinc Chloride ZnCl2
Formula Weight 136.30
CAS Number 7646-85-7
Assay: 97.0% ZnCl2 Zinc Chloride
Oxychloride: Passes test
Insoluble matter: 0.005%
Nitrate (NO3): 0.003%
Sulfate (SO4): 0.01%
Ammonium (NH4): 0.005%
Calcium (Ca): 0.06%
Iron (Fe): 0.001%
Lead (Pb): 0.005%
Magnesium (Mg): 0.01%
Potassium (K): 0.02%
Sodium (Na): 0.05%
Zinc Chloride is used for Friedel Craft Reaction, Azotropic or Azeotropic Distillation & Desiccation.
Zinc Chloride BP USP IP ACS Analytical Reagent manufacturers at:
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: firstname.lastname@example.org
Copyright and Usual Disclaimer is Applicable.
Old Spice: Manufacturing since more than Three Decades: Ammonium Chloride Calcium Chloride Magnesium Chloride Magnesium Sulfate Potassium Chloride Sodium Acetate Sodium Thiosulfate Zinc Chloride Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals Ammonium Chloride Benzyl Alcohol Boric Acid Borax; Sodium Borate Calcium Chloride Calcium Hydroxide Calcium Oxide Calcium Sulfate Calcium Phosphate Calcium Saccharate Chromic Chloride Citric Acid Gentian Violet Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Methylene Blue Maleic Acid Potassium Chloride Potassium Acetate Potassium Phosphate Sodium Acetate Sodium Hydroxide Pellets Sodium Phosphate Sodium Thiosulfate Sodium Propionate Zinc Chloride Other Best Seller Products: Aluminium Potassium Sulphate; Potash Alum Ammonium Persulfate Ammonium Phosphate Aluminum Chloride Barium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Cupric Chloride Potassium Phosphate Sodium Formate Sodium Formaldehyde Bisulfite Sodium Nitrite Nitrate Sodium Phosphate Tertiary Butylhydroquinone Zinc Sulphate Zinc Ammonium Chloride Flux Oil Field Chemicals
Global or International Zinc Chloride BP IP USP FCC Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.