Mubychem Group, established in 1976, is the pioneer manufacturer of Potassium Acetate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Potassium Acetate USP BP Ph Eur IP ACS AR Analytical Reagent Grade Manufacturers
MSDS of Potassium Acetate BP USP IP ACS Analytical Reagent grade Manufacturers
Potassium Acetate BP Ph Eur Grade Specifications
C2H3O2K -- 98.14 -- CAS Number 127-08-2
Potassium acetate contains not less than 99.0 per cent and not more than the equivalent of 101.0 per cent of C2H3KO2, calculated with reference to the dried substance.
A white, crystalline powder or colourless crystals, deliquescent, very soluble in water, freely soluble in alcohol.
A. It gives reaction of acetates.
B. It gives reaction of potassium.
Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Dissolve 1.0 g in carbon dioxide-free water and dilute to 20 ml with the same solvent. The pH of the solution is 7.5 to 9.0.
Dilute 10 ml of solution S to 100 ml with water. Add 5 ml of dilute sulphuric acid and 0.5 ml of a 0.32 g/l solution of potassium permanganate. Mix and boil gently for 5 min. The solution remains pink.
Dilute 2.5 ml of solution S to 15 ml with water. The solution complies with the limit test for chlorides (200 ppm).
Dilute 7.5 ml of solution S to 15 ml with distilled water. The solution complies with the limit test for sulphates (200 ppm).
If intended for use in the manufacture of peritoneal dialysis solutions, haemofiltration solutions or hem dialysis solutions, it complies with the test for aluminium. Dissolve 2.0 g in 50 ml of water and add 5 ml of acetate buffer solution pH 6.0. The solution complies with the limit test for aluminium (1 ppm). Use as a reference solution a mixture of 1 ml of aluminium standard solution (2 ppm Al), 5 ml of acetate buffer solution pH 6.0 R and 49 ml of water. To prepare the blank use a mixture of 5 ml of acetate buffer solution pH 6.0 R and 50 ml of water.
Dilute 5 ml of solution S to 10 ml with water. The solution complies with the limit test for iron (20 ppm).
Dissolve 5.0 g in water and dilute to 20 ml with the same solvent. 12 ml of the solution complies with limit test A for heavy metals (4 ppm). Prepare the standard using lead standard solution (1 ppm Pb).
Not more than 0.5 per cent of Na, determined by atomic emission
Loss on drying
Not more than 3.0 per cent, determined on 1.000 g by drying in an oven at 100 °C to 105C.
Potassium Acetate USP Grade Specifications
Acetic acid, potassium salt.
Potassium acetate [CAS 127-08-2].
Potassium Acetate contains not less than 99.0 percent and not more than 100.5 percent of C2H3KO2, calculated on the dried basis.
Identification— A solution (1 in 10) responds to the tests for Potassium and for Acetate.
pH: between 7.5 and 8.5, in a solution (1 in 20).
Loss on drying— Dry it at 150 for 2 hours: it loses not more than 1.0% of its weight.
Heavy metals— the limit is 0.002%.
Limit of sodium— To pass the test not more than 0.03% of sodium is found.
Potassium Acetate ACS Reagent Grade Specifications
Formula Wt. 98.14
CAS Number 127-08-2
pH of a 5% solution
6.5-9.0 at 25C
Insoluble matter ........... 0.005%
Chloride (Cl) ............... 0.003%
Phosphate (PO4) ........ 0.001%
Sulfate (SO4) ............. 0.002%
Heavy metals (as Pb) .. 5 ppm
Iron (Fe) ..................... 5 ppm
Calcium (Ca) .............. 0.005%
Magnesium (Mg) ........ 0.002%
Sodium (Na) .............. 0.03%
Potassium Acetate BP USP ACS AR Analytical Reagent Manufacturers:
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264
USA & Canadian Customers may e-mail: firstname.lastname@example.org
Copyright and Usual Disclaimer is Applicable.
Old Spice: Manufacturing since more than Three Decades: Ammonium Chloride Calcium Chloride Magnesium Chloride Magnesium Sulfate Potassium Chloride Sodium Acetate Sodium Thiosulfate Zinc Chloride Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals Ammonium Chloride Benzyl Alcohol Boric Acid Borax; Sodium Borate Calcium Chloride Calcium Hydroxide Calcium Oxide Calcium Sulfate Calcium Phosphate Calcium Saccharate Chromic Chloride Citric Acid Gentian Violet Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Methylene Blue Maleic Acid Potassium Chloride Potassium Acetate Potassium Phosphate Sodium Acetate Sodium Hydroxide Pellets Sodium Phosphate Sodium Thiosulfate Sodium Propionate Zinc Chloride Other Best Seller Products: Aluminium Potassium Sulphate; Potash Alum Ammonium Persulfate Ammonium Phosphate Aluminum Chloride Barium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Cupric Chloride Potassium Phosphate Sodium Formate Sodium Formaldehyde Bisulfite Sodium Nitrite Nitrate Sodium Phosphate Tertiary Butylhydroquinone Zinc Sulphate Zinc Ammonium Chloride Flux Oil Field Chemicals
Global or International Potassium Acetate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.