Logo

Mubychem Group, established in 1976, is the pioneer manufacturer of Potassium Alum, Aluminum Potassium Sulfate, Potash Alum, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter IndiaJumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.Chemicals Container Leak Proof Drum Quick DeliveryProduct Image; Liquid ProductsExporter Importer

Potassium Alum, Aluminum Potassium Sulfate, Potash Alum Manufacturers, MSDS Sheet

Potassium Alum, Potash Alum, Aluminum Potassium Sulfate USP BP IP ACS Analytical Reagent FCC Food Grade Manufacturers

Potash Alum
Technical & Pure Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Potash Alum

Potassium Alum MSDS Sheet, Material safety Data Sheet

1. Product Identification

Synonyms: Sulfuric acid, aluminum potassium salt (2:1:1), dodecahydrate; potassium alum dodecahydrate; Alum Potassium USP Powder TAC; Potassium alum; Potash alum; Alum; Kalinite
CAS No.: 10043-67-1 (Anhydrous) 7784-24-9 (Dodecahydrate)
Molecular Weight: 474.38
Chemical Formula: AlK(SO4)2 12H2O

2. Composition/Information on Ingredients

Ingredient: Sulfuric Acid, Aluminum Potassium Salt (2:1:1) or Potash Alum or Potassium Alum or Aluminum Potassium Sulfate
CAS No.: 10043-67-1
Percent: 98 - 100%
Hazardous: Yes

3. Hazards Identification

Potential Acute Health Effects: Potash Alum is hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
Potential Chronic Health Effects:
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Repeated or prolonged exposure is not known to aggravate medical condition.

4. First Aid Measures

Inhalation: If Potassium Alum or Aluminum Potassium Sulfate is inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: In case of contact with Potash Alum, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.

5. Fire Fighting Measures

Fire: Potassium Alum or Aluminum Potassium Sulfate is not considered to be a fire hazard.
Explosion: Potash Alum is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Keep in mind that addition of water can cause the formation of sulfuric acid.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Cover spill with soda ash and mix. Ventilate area of leak or spill. Keep unnecessary and unprotected people away from area of spill. Wear appropriate personal protective equipment. Pick up spills and place in a suitable container for reclamation or disposal, using a method that does not generate dust.

7. Handling and Storage

Keep Potassium Alum or Aluminum Potassium Sulfate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of Potassium Alum or Aluminum Potassium Sulfate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product Potash Alum.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
-OSHA Permissible Exposure Limit (PEL):
15 mg/m3 (TWA) total dust and 5 mg/m3 (TWA)
respirable fraction for Aluminum metal as Al.
-ACGIH Threshold Limit Value (TLV):
1 mg/m3 respirable fraction (TWA), Aluminum metal and Insoluble compounds, A4.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded and engineering controls are not feasible, a half face piece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest.. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Potassium Alum or Aluminum Potassium Sulfate is colorless crystals.
Odor: Potash Alum is odorless.
Solubility: 14% in water, 333% in boiling water
Density: 1.73
pH: 3.3 (0.2 M solution)
% Volatiles by volume @ 21C (70F): 0
Boiling Point: ca. 200C (ca. 392F) Loses water
Melting Point: 92.5C (198F)

10. Stability and Reactivity

Stability: Potassium Alum or Aluminum Potassium Sulfate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Hydrolyzes to form dilute sulfuric acid. Toxic and corrosive oxides of sulfur may be formed when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Potash Alum is corrosive to metals in the presence of water.
Conditions to Avoid: Moisture and incompatibles.

11. Toxicological Information

Investigated as a reproductive effector.
--------\Cancer Lists\------------- ------------------------
----------------- ----------------- NTP Carcinogen---
Ingredient ------------------------ Known  Anticipated  IARC Category
----------------------------------- -----  -----------  ----
Sulfuric Acid, Aluminum Potassium - No --  No --------  None
Salt (2:1:1) (10043-67-1)

12. Ecological Information

Environmental Fate: No information found.
Environmental Toxicity: No information found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Potash Alum in accordance with federal, state and local requirements.

14. Transport Information

Not regulated.

15. Regulatory Information

--------\Chemical Inventory Status - Part 1\---------------------------------

Ingredient                                       TSCA  EC   Japan  Australia

-----------------------------------------------  ----  ---  -----  ---------

Sulfuric Acid, Aluminum Potassium Salt (2:1:1)    Yes  Yes   Yes      Yes

(10043-67-1)

--------\Chemical Inventory Status - Part 2\---------------------------------

                                                        --Canada--

Ingredient                                       Korea  DSL   NDSL  Phil.

-----------------------------------------------  -----  ---   ----  -----

Sulfuric Acid, Aluminum Potassium Salt (2:1:1)    Yes   Yes   No     Yes

(10043-67-1)

--------\Federal, State & International Regulations - Part 1\----------------

                                           -SARA 302-    ------SARA 313------

Ingredient                                 RQ    TPQ     List  Chemical Catg.

-----------------------------------------  ---   -----   ----  --------------

Sulfuric Acid, Aluminum Potassium Salt     No    No      No         No

(2:1:1) (10043-67-1)

--------\Federal, State & International Regulations - Part 2\----------------

                                                      -RCRA-    -TSCA-

Ingredient                                 CERCLA     261.33     8(d)

-----------------------------------------  ------     ------    ------

Sulfuric Acid, Aluminum Potassium Salt     No         No         No

(2:1:1) (10043-67-1)

 

Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No

SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No

Reactivity: No  (Pure / Solid)

Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.

16. Other Information

NFPA Ratings: Health: 1 Flammability: 0 Reactivity: 0
Label Hazard Warning:
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT.
Label Precautions:
Avoid breathing dust.
Keep container closed.
Use only with adequate ventilation.
Wash thoroughly after handling.
Avoid contact with eyes, skin and clothing.
Label First Aid:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. In case of contact, wipe off excess material from skin then immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. In all cases, get medical attention.

Disclaimer:
******************************
Our company provides this  Potassium Alum or Aluminum Potassium Sulfate MSDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Potash Alum Potassium Alum or Aluminum Potassium Sulphate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
******************************

Potash Alum Potassium Alum manufacturers
Aluminum Potassium Sulfate Sulphate Manufacturers at:

MUBYCHEM GROUP
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: usa@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Isatoic Anhydride Methyl & Dimethyl Anthranilate
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux  

Potash Alum Potassium Alum Aluminum Potassium Sulfate Aluminium Potassium Sulphate BP USP FCC Food grade ACS Manufacturers

Global or International Potassium Alum or Potash Alum or Aluminum Potassium Sulphate Aluminium Potassium Sulphate Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.