Logo

Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter IndiaJumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.Chemicals Container Leak Proof Drum Quick DeliveryProduct Image; Liquid ProductsExporter Importer

Sodium Chloride Manufacturers, MSDS

Sodium Chloride BP USP ACS FCC IP Manufacturers

Sodium Chloride
Pure Crystals, IP BP Ph. Eur. USP ACS AR LR
Sodium Chloride

Sodium Chloride MSDS Sheet, Material safety Data Sheet

Section 1 - Chemical Product and Identification

MSDS Name: Sodium Chloride
Synonyms: Common salt; Halite; Rock salt; Saline; Salt; Sea salt; Table salt.

Section 2 - Composition, Information on Ingredients

Chemical Name: Sodium chloride
CAS#: 7647-14-5
Percent:: 100
Einecs EC No.: 231-598-3

Section 3 - Hazards Identification

Potential Health Effects
Eye: May cause eye irritation.
Skin: May cause skin irritation.
Ingestion: Ingestion of large amounts may cause gastrointestinal irritation. Ingestion of large amounts may cause nausea and vomiting, rigidity or convulsions. Continued exposure can produce coma, dehydration, and internal organ congestion.
Inhalation: May cause respiratory tract irritation.
Chronic: No information found.

Section 4 - First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid. Wash mouth out with water.
Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: None

Section 5 - Fire Fighting Measures

General Information: Water runoff can cause environmental damage. Dike and collect water used to fight fire. Wear appropriate protective clothing to prevent contact with skin and eyes. Wear a self-contained breathing apparatus (SCBA) to prevent contact with thermal decomposition products. Substance is noncombustible.
Extinguishing Media: For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.

Section 6 - Accidental Release Measures

General Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation.

Section 7 - Handling and Storage

Handling: Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not ingest or inhale.
Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.

Section 8 - Exposure Controls, Personal Protection

Engineering Controls: Good general ventilation should be sufficient to control airborne levels. Facilities storing or utilizing the material should be equipped with an eyewash facility and a safety shower.
Exposure Limits: Sodium Chloride is not listed by ACGIH NIOSH & OSHA-Final PELs.
Personal Protective Equipment
Eyes: Wear safety glasses with side shields.
Skin: Wear appropriate gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: A NIOSH/MSHA approved air purifying dust or mist respirator or European Standard EN 149.

Section 9 - Physical and Chemical Properties

Physical State: Solid
Appearance: Colorless or white
Odor: Odorless
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: 2575 deg F
Freezing/Melting Point:1474 deg F
Auto ignition Temperature: Not available.
Flash Point: Not applicable.
Decomposition Temperature: Not available
NFPA Rating: (estimated) Health: 1; Flammability: 0; Reactivity: 0
Explosion Limits: Not available.
Solubility: Soluble.
Specific Gravity/Density: 2.165
Molecular Formula: NaCl
Molecular Weight: 58.43

Section 10 - Stability and Reactivity

Chemical Stability: Stable.
Conditions to Avoid: High temperatures, exposure to moist air or water.
Incompatibilities with Other Materials: It reacts with most non-noble metals such as iron or steel, building materials (such as cement), bromine, or trifluoride. Potentially explosive reaction with dichloro-maleic anhydride + urea. Electrolysis of mixtures with nitrogen compounds may form explosive nitrogen tri-chloride.
Hazardous Decomposition Products: Toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information

RTECS#:
CAS# 7647-14-5: VZ4725000
LD50/LC50:
Draize test, rabbit, eye: 100 mg Mild;
Draize test, rabbit, eye: 100 mg/24H Moderate;
Draize test, rabbit, eye: 10 mg Moderate;
Draize test, rabbit, skin: 50 mg/24H Mild;
Draize test, rabbit, skin: 500 mg/24H Mild;
Inhalation, rat: LC50 = >42 gm/m3/1H;
Oral, mouse: LD50 = 4 gm/kg;
Oral, rat: LD50 = 3 gm/kg;
Skin, rabbit: LD50 = >10 gm/kg;<BR.

Carcinogenicity: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Epidemiology: No information reported.
Teratogenic: An experimental teratogen.
Reproductive Effects: Human reproductive effects by intraplacental route: terminates pregnancy. Experimental reproductive effects.
Neurotoxicity: No information reported
Mutagenicity: See actual entry in RTECS for complete information.

Section 12 - Ecological Information

Ecotoxicity: No data available. No information found.
Environmental: No information reported.
Physical: No information found.
Other: No information found.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

Transportation of Sodium Chloride is not regulated.

 Section 15 - Regulatory Information

US Federal and State Regulations: TSCA 8(b) inventory: Sodium chloride
EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC):
R40- Possible risks of irreversible effects. S24/25- Avoid contact with skin and eyes.
HMIS (U.S.A.):
Health Hazard: 1
Fire Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 1
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Splash goggles.

Section 16 - Additional Information

Disclaimer:
******************************
Our company provides this Sodium Chloride MSDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium Chloride MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
******************************

Sodium chloride manufacturers:

MUBYCHEM GROUP
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: usa@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Isatoic Anhydride Methyl & Dimethyl Anthranilate
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux  

Sodium Chloride IP BP USP ACS Manufacturers

Global or International Sodium Chloride Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.