Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Diacetate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Sodium Diacetate Manufacturers, MSDS Sheet
Sodium Diacetate Manufacturers
Sodium Acetate BP USP IP ACS AR & Food Grade
Pure & FCC Food Grades
Sodium Diacetate MSDS Sheet, Material Safety Data Sheet
Section 1: Chemical Product and Company Identification
Product Name: Sodium diacetate, Sodium di acetate
Chemical Name: Not available
Chemical Formula: C4H7O4Na+xH2O
Section 2: Composition and Information on Ingredients
Name Sodium diacetate
CAS #.: 126-96-5
% by Weight: 100
Section 3: Hazards Identification
Potential Acute Health Effects:
Sodium di acetate is very hazardous in case of skin contact (irritant), of eye contact (irritant). Hazardous in case of ingestion, of inhalation (lung irritant). Slightly hazardous in case of skin contact (corrosive, permeator). Sodium diacetate is Inflammation of the eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available for Sodium Diacetate.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated or prolonged exposure is not known to aggravate medical condition.
Section 4: First Aid Measures
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
Skin Contact: After contact of Sodium Diacetate with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing.
Serious Skin Contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation: Not available.
Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion: Not available for Sodium Diacetate.
Section 5: Fire and Explosion Data
Flammability of the Product: Sodium diacetate or di acetate may be combustible at high temperature.
Auto-Ignition Temperature:Not available for Sodium diacetate.
Flash Points: Not available for Sodium diacetate.
Flammable Limits: Not available for Sodium di acetate.
Products of Combustion: These products are carbon oxides (CO, CO2). Some metallic oxides.
Fire Hazards in Presence of Various Substances: Not available for Sodium diacetate.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available for Sodium di acetate.
Risks of explosion of the product in presence of static discharge: Not available for Sodium diacetate.
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Special Remarks on Fire Hazards: Not available for Sodium diacetate.
Special Remarks on Explosion Hazards: Not available.
Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid Sodium diacetate in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Section 7: Handling and Storage
Precautions: Keep Sodium diacetate container dry. Keep Sodium di acetate away from heat. Keep Sodium di acetate away from sources of ignition. Empty containers of Sodium diacetate pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing Sodium di acetate. Do not breathe dust of Sodium diacetate. Never add water to Sodium di acetate. In case of insufficient ventilation, wear suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes
Storage: Keep Sodium diacetate container dry. Keep Sodium di acetate in a cool place. Ground all equipment containing material. Keep Sodium diacetate container tightly closed. Keep Sodium di acetate in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Exposure Limits: Not available for Sodium diacetate.
Section 9: Physical and Chemical Properties
Physical state and appearance: Sodium di acetate is Solid. (Solid crystalline powder.)
Odor: Acetic acid. (Strong.)
Taste: Not available.
Molecular Weight: 142. g/mole
Color: Sodium diacetate is white.
pH (1% soln/water): 5 [Acidic.]
Boiling Point: Not available.
Melting Point: 328C (622.4F)
Critical Temperature: Not available.
Specific Gravity: Not available.
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available for Sodium diacetate.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water, diethyl ether.
Sodium Diacetate is easily soluble in cold water, hot water.
Partially soluble in diethyl ether.
Section 10: Stability and Reactivity Data
Stability: Sodium diacetate or di acetate is stable.
Instability Temperature: Not available for Sodium di acetate.
Conditions of Instability: Not available for Sodium diacetate.
Incompatibility with various substances: Not available for Sodium di acetate.
Corrosivity: Sodium diacetate or di acetate is non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Section 11: Toxicological Information
Routes of Entry: Eye contact. Inhalation. Ingestion.
Toxicity to Animals:
LD50: Not available.
LC50: Not available.
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans:
Sodium diacetate is very hazardous in case of skin contact (irritant).
Sodium di acetate is hazardous in case of ingestion, of inhalation (lung irritant).
Slightly hazardous in case of skin contact (corrosive, permeator).
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Not available.
Special Remarks on other Toxic Effects on Humans: Not available for Sodium Diacetate.
Section 12: Ecological Information
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Waste Disposal: To be done as per local regulations.
Section 14: Transport Information
DOT Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Special Provisions for Transport: Not applicable.
Section 15: Other Regulatory Information
Federal and US State Regulations:
Connecticut carcinogen reporting list.: Sodium diacetate
TSCA 8(b) inventory: No products were found.
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
WHMIS (Canada): CLASS D-2B: Material causing other toxic effects (TOXIC).
R37/38- Irritating to respiratory system and skin.
R41- Risk of serious damage to eyes.
Health Hazard: 2
Fire Hazard: 1
Personal Protection: E
National Fire Protection Association (U.S.A.):
Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate.
Section 16: Other Information
Our company provides this Sodium diacetate MSDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium diacetate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Sodium Diacetate manufacturers at:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: firstname.lastname@example.org
Copyright and Usual Disclaimer is Applicable.
Old Spice: Manufacturing since more than Three Decades: Ammonium Chloride Calcium Chloride Magnesium Chloride Magnesium Sulfate Potassium Chloride Sodium Acetate Sodium Thiosulfate Zinc Chloride Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals Ammonium Chloride Benzyl Alcohol Boric Acid Borax; Sodium Borate Calcium Chloride Calcium Hydroxide Calcium Oxide Calcium Sulfate Calcium Phosphate Calcium Saccharate Chromic Chloride Citric Acid Gentian Violet Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Methylene Blue Maleic Acid Potassium Chloride Potassium Acetate Potassium Phosphate Sodium Acetate Sodium Hydroxide Pellets Sodium Phosphate Sodium Thiosulfate Sodium Propionate Zinc Chloride Other Best Seller Products: Ammonium Persulfate Ammonium Phosphate Aluminum Chloride Barium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Cupric Chloride Potassium Phosphate Sodium Formate Sodium Formaldehyde Bisulfite Sodium Nitrite Nitrate Sodium Phosphate Tertiary Butylhydroquinone Zinc Sulphate Zinc Ammonium Chloride Flux
Global or International Sodium Diacetate Food Grade Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.