Mubychem Group, established in 1976, is the pioneer manufacturer of Ferric Chloride Hexahydrate Anhydrous, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter India Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Chemicals Container Leak Proof Drum Quick Delivery

Ferric Chloride Hexahydrate SDS MSDS Sheet of Manufacturers

Specifications of Ferric Chloride Hexahydrate & Anhydrous

Ferric Chloride
Hexahydrate
BP Ph Eur ACS AR Grades

Ferric chloride hexahydrate

Ferric Chloride Hexahydrate SDS GHS, MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Synonyms: Iron trichloride, hexahydrate / Iron perchloride, hexahydrate
CAS No.: 10025-77-1
EINECS: EC Number: 231-729-4
Molecular Weight: 270.3
Chemical Formula: FeCl3.6H20

2. Hazards Identification

Corrosive to Metals Category 1
Acute toxicity, oral Category 4
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 1

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910

GHS Label Elements
Irritant
Irritant

GHS Label Elements
corrosive
Corrosive

Signal Words: Danger

Hazard statements:
H290: May be corrosive to metals.
H302: Harmful if swallowed.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H401: Toxic to aquatic life

Precautionary statements:
P234: Keep only in original container.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P330: Rinse mouth.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+352: IF ON SKIN: Wash with soap and water.
P332+313: If skin irritation occurs: Get medical advice/attention.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P362: Take off contaminated clothing and wash before reuse.
P390: Absorb spillage to prevent material damage.
P404: Store in a closed container.
P501: Dispose of contents/container to authorized agents only.

3. Composition/Information on Ingredients

Ingredient: Ferric Chloride Hexahydrate
CAS No.: 10025-77-1
EINECS: EC Number: 231-729-4

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Flammability of the Product: The product is not flammable.
Products of Combustion: It forms oxides of iron and hydrochloric acid when heated to decomposition.
Fire Extinguishing Media: Use water spray, dry chemical, foam, or carbon dioxide.
Special Information
 In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.

6. Accidental Release Measures

Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water and swab.

7. Handling and Storage

Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep Ferric Chloride Hexahydrate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with oxidizing material and combustible substances. Avoid moisture and store away from water sources.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established. Assure it as below 2mg/m3.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Ferric Chloride Hexahydrate is yellowish crystals or powder or granules.
Solubility: Soluble.
pH: Not available.
Density: 1.8 gm/cc
Molecular Weight: 270.3
Molecular Formula: FeCl3-6H2O
% Volatile by volume @ 21C (70F): 0
Boiling Point: 280 - 285 °C - lit.
Melting Point: Melting point/range: 37 °C

10. Stability and Reactivity

Stability: Ferric chloride hexahydrate is stable under ordinary conditions of use and storage. It must be kept in air tight containers.
Hazardous Decomposition Products: It produces oxides of iron along with hydrochloric acid when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Forms shock-sensitive mixtures with certain other materials., Sodium/sodium oxides, Potassium.
Conditions to Avoid: Moisture, Heat, Sun light, Incompatibles.

11. Toxicological Information

Toxicity to Animals:
Oral, mouse: LD50 = 900 mg/kg;
Oral, rat: LD50 = 900 mg/kg;
Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.

12. Ecological Information

This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Do not allow material to contaminate ground water system.
BOD5 and COD: Not available.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Ferric chloride Hexahydrate in accordance with federal, state and local requirements.

14. Transport Information

DOT
UN-No UN3260
Proper Shipping Name CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Proper technical name Iron (III) chloride hexahydrate
Hazard Class 8
Packing Group III
TDG
UN-No UN3260
Proper Shipping Name CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class 8
Packing Group III
IATA
UN-No UN3260
Proper Shipping Name CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class 8
Packing Group III
IMDG/IMO
UN-No UN3260
Proper Shipping Name CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class 8
Packing Group III

15. Regulatory Information

SARA 313: Not applicable.
SARA 311/312 Hazardous Categorization: Acute Health Hazard, Chronic Health Hazard.
California Proposition 65: Not listed.
WHMIS Canada: Class E: Corrosive material.

16. Other Information

Disclaimer:
******************************
Our company provides this Ferric Chloride Hexahydrate MSDS sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS MSDS is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
******************************

Ferric Chloride Hexahydrate BP ACS grade Manufacturers:

MUBYCHEM GROUP
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: usa@mubychem.com

India Manufacturer Logo

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Isatoic Anhydride Methyl & Dimethyl Anthranilate
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux Oil Field Chemicals

Ferric chloride hexahydrate manufacturers

Global or International Ferric Chloride Hexahydrate BP ACS AR Grade --- Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.