Logo

Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Metabisulphite, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter IndiaJumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.Chemicals Container Leak Proof Drum Quick DeliveryProduct Image; Liquid ProductsExporter Importer

Sodium Metabisulfite Sodium Metabisulphite Manufacturers MSDS Sheet

Sodium Metabisulphite Metabisulfite BP IP USP ACS Analytical Reagent FCC Food grade Manufacturers

Sodium Metabisulfite
Technical & Pure Sodium Metabisulphite
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Sodium Metabisulfite

Sodium Metabisulfite MSDS Sheet, Sodium Metabisulphite Material Safety Data Sheet

1. Product Identification

Synonyms: Disulfurous acid, Disodium salt, Fertisilo; Pyrosulfurous acid, disodium salt; Sodium disulfite; Disodium pyrosulfite; Sodium pyrosulfite.
CAS No.: 7681-57-4 Sodium Metabisulfite or Sodium Metabisulphite.
Molecular Weight: 190.11
Chemical Formula: Na2S2O5 (sodium metabisulfite)

2. Composition/Information on Ingredients

Ingredient: Sodium Metabisulfite
CAS No.: 7681-57-4
Percent: 100%

3. Hazards Identification

Emergency Overview
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. MAY CAUSE ALLERGIC RESPIRATORY REACTION. REACTS WITH ACIDS AND WATER RELEASING TOXIC SULFUR DIOXIDE GAS.
Potential Health Effects
Inhalation:
Breathing dusts or particulates generated by Sodium Metabisulfite can lead to irritation of the nose, throat or respiratory system. Symptoms of such exposure could include coughing and sneezing. This product can cause an asthma-like allergy with symptoms such as shortness of breath, wheezing, coughing, urticaria, angioedema, nasal congestion, nasal polyp swelling and chest tightness. Severe general (anaphylactic) reactions can occur, which can be life-threatening in some cases.
Ingestion: Sodium Metabisulfite may cause gastric irritation by the liberation of sulfurous acid. An asthmatic reaction may occur after ingestion. Large doses may result in nausea, vomiting, diarrhea, abdominal pains, circulatory disturbance, and central nervous system depression. Estimated fatal dose is 10 gm.
Skin Contact: Sodium Metabisulfite causes irritation to skin. Symptoms include redness, itching, and pain.
Eye Contact: Causes irritation, redness, and pain. Contact may cause irreversible eye damage. Symptoms may include stinging, tearing, redness, swelling, corneal damage and blindness.
Chronic Exposure: No information found.
Aggravation of Pre-existing Conditions: Some individuals are said to be dangerously sensitive to minute amounts of sulfites in foods. Symptoms may include broncho constriction, shock, gastrointestinal disturbances, angio edema, flushing, and tingling sensations. Once allergy develops, future exposures can cause asthma attacks with shortness of breath, wheezing, and cough.

4. First Aid Measures

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Fire: Sodium Metabisulfite is not considered to be a fire hazard.
Explosion: Sodium Metabisulphite is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Do not allow water runoff to enter sewers or waterways.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust. Cautiously spray residue with plenty of water, providing ventilation to clear sulfur dioxide fumes generated from water contact. US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities.

7. Handling and Storage

Keep Sodium Metabisulfite in a tightly closed container. Protect from physical damage. Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. Releases toxic sulfur dioxide gas when in contact with water, ice. Keep away from acids, water, ice, and oxidizing agents. Use only with appropriate protective equipment. Do not use in unventilated areas such as holds of fishing boats, walk in coolers or confined spaces. Containers of Sodium Metabisulphite may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
-ACGIH Threshold Limit Value (TLV):
5mg/m3 (TWA) for sodium metabisulfite, A4 Not classifiable as a human carcinogen.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded, a half-face respirator with an acid gas cartridge may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece respirator with an acid gas cartridge may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact. (neoprene, polyvinyl chloride).
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Sodium Metabisulfite is white to yellow white crystalline granules.
Odor: Slight odor of sulfur dioxide.
Solubility: Very soluble in water, insoluble in alcohol.
Specific Gravity: 1.48
pH: Aqueous solution is acidic.
Melting Point: 150C (302F)

10. Stability and Reactivity

Stability: Product is normally stable. Sodium Metabisulfite is air and moisture sensitive and releases sulfur dioxide slowly at ambient temperatures. Sodium Metabisulfite will decompose on heating to form sodium sulfate. Contact with moisture (water, wet ice, etc.), will release toxic sulfur dioxide gas.
Hazardous Decomposition Products: Oxides of sulfur and sodium may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Water, acids, alkalis, sodium nitrite, oxidizers, aluminum powder.
Conditions to Avoid: Moisture, heat, flames, ignition sources and incompatibles.

11. Toxicological Information

Sodium Metabisulfite [7681-57-4]: No LD50/LC50 information found relating to normal routes of occupational exposure. Investigated as a tumorigen, mutagen and reproductive effector. Sodium Bisulfite [7631-90-5]: Oral rat LD50: 2000 mg/kg. Investigated as a tumorigen and mutagen.

--------\Cancer Lists\---------------------------------------------
--------------------------------  --NTP Carcinogen--
Ingredient ---------------------  Known  Anticipated  IARC Category
--------------------------------  -----  -----------  -------------
Sodium Metabisulfite (7681-57-4)  No --- No --------- 3

12. Ecological Information

Environmental Fate: No information found.
Environmental Toxicity: No information found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.. Dispose of container of Sodium Metabisulfite and unused contents in accordance with legal requirements.

14. Transport Information

Not regulated.

15. Regulatory Information

--------\Chemical Inventory Status - Part 1\-----------------

Ingredient ---------------------  TSCA  EC   Japan  Australia

--------------------------------  ----  ---  -----  ---------

Sodium Metabisulfite (7681-57-4)  Yes  Yes   Yes      Yes

Sodium Bisulfite (7631-90-5)      Yes  Yes   Yes      Yes

--------\Chemical Inventory Status - Part 2\-----------------

---------------------------------------  --Canada--

Ingredient ---------------------  Korea  DSL   NDSL  Phil.

--------------------------------  -----  ---   ----  -----

Sodium Metabisulfite (7681-57-4)  Yes    Yes   No    Yes

Sodium Bisulfite (7631-90-5)      Yes    Yes   No    Yes

USA Federal, State & International Regulations - Part 1\-----

--------------------------------  -SARA 302- ------SARA 313------

Ingredient ---------------------  RQ    TPQ  List  Chemical Catg.

--------------------------------  ---   ---  ----  --------------

Sodium Metabisulfite (7681-57-4)  No    No   No    No

Sodium Bisulfite (7631-90-5)      No    No   No    No

USA Federal, State & International Regulations - Part 2\-----

----------------------------------------  RCRA-   -TSCA-

Ingredient ---------------------  CERCLA  261.33  8(d)

--------------------------------  ------  ------  ------

Sodium Metabisulfite (7681-57-4)  No      No      Yes

Sodium Bisulfite (7631-90-5)      5000    No      Yes

Chemical Weapons Convention: No; TSCA 12(b): No; CDTA:  No
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No
Reactivity: Yes (Mixture / Solid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.

US Federal and State Regulations: TSCA 8(b) inventory: Sodium metabisulfite TSCA 4(a) ITC priority list: Sodium metabisulfite TSCA 8(a) PAIR: Sodium metabisulfite TSCA 8(d)
OSHA:
Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
EINECS:
This product is on the European Inventory of Existing Commercial Chemical Substances.
WHMIS (Canada):
CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
DSCL (EEC):
HMIS (U.S.A.):

Health Hazard: 2
Fire Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):

Health: 2
Flammability: 0
Reactivity: 0
Protective Equipment: Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Safety glasses.

16. Other Information

Disclaimer:
******************************
Our company provides this Sodium metabisulfite metabisulphite MSDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium metabisulfite MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
******************************

Sodium Metabisulphite manufacturers
Sodium Metabisulfite manufacturers:

MUBYCHEM GROUP
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: usa@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Isatoic Anhydride Methyl & Dimethyl Anthranilate
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux  

Sodium Metabisulfite Metabisulphite IP BP USP NF ACS Analytical Reagent FCC Food grade Manufacturers

Global or International Sodium Metabisulfite Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.