Mubychem Group, established in 1976, is the pioneer manufacturer of Magnesium Oxide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Magnesium Oxide Pure & BP Ph Eur FCC Food Grade Manufacturers
For MSDS Sheet Click
Magnesium Oxide MSDS Sheet
CAS Number 1309-48-4, BP Ph Eur FCC Food Grades
Specifications of Standard Grade of MgO Item of Quality STARMgO#150 -- EX-STOCK Highly Active RUNNING ITEM Moisture(%) 0.5 Loss on Ignition(%) 6.5 MgO *1(%) 98.0 CaO(%) 0.6 Fe(%) 0.02 Al(%) 0.01 Acid Insoluble Substances(%) 0.01 Bulk Density(g/ml) 0.55 Average Particle Size(um) 3.5 Specific Surface Area (BET)(m2/g) 145 Screen Residue (75um)(%) 0.01
*1 Measured after Ignition
We also offer High Purity Magnesium oxide of the Grade HP Series, having consistent stable quality and characteristics.
Apart from that we offer BP grade and FCC food grade MgO.
Packing: Net weights are 25kg, 20kg and 10kg. Products are packed in multilayer bags with a separately sealed polyethylene inner bag.
Heavy Magnesium Oxide BP Ph Eur Grade Specifications
MgO -- 40.30 -- CAS Number 1309-48-4
Content: 98.0 per cent to 100.5 per cent of MgO (ignited substance).
Appearance: Fine, white or almost white powder.
Solubility: Practically insoluble in water. It dissolves in dilute acids with at most slight effervescence.
A. 15 g has an apparent volume (2.9.15) before settling of not more than 60 ml.
B. Dissolve about 15 mg in 2 ml of dilute nitric acid R and neutralise with dilute sodium hydroxide solution R. The solution gives the reaction of magnesium.
C. Loss on ignition (see Tests).
Solution S: Dissolve 5.0 g in a mixture of 30 ml of distilled water and 70 ml of acetic acid, boil for 2 min, cool and dilute to 100 ml with dilute acetic acid. Filter, if necessary, through a previously ignited and tared porcelain or silica filter crucible of suitable porosity to give a clear filtrate.
Appearance of solution: Solution S is not more intensely coloured than reference.
Soluble substances: Maximum 2.0 per cent.
To 2.00 g add 100 ml of water R and boil for 5 min. Filter whilst hot through a sintered-glass filter (40) (2.1.2), allow to cool and dilute to 100 ml with water R. Evaporate 50 ml of the filtrate to dryness and dry at 100-105 °C. The residue weighs a maximum of 20 mg.
Substances insoluble in acetic acid: Maximum 0.1 per cent.
Any residue obtained during the preparation of solution S, washed, dried, and ignited at 600 ±50 °C, weighs a maximum of 5 mg.
Chlorides: Maximum 0.1 per cent.
Sulphates: Maximum 1.0 per cent.
Arsenic: Maximum 4 ppm, determined on 5 ml of solution S.
Calcium: Maximum 1.5 per cent.
Iron: Maximum 0.07 per cent.
Heavy metals: Maximum 30 ppm.
Loss on ignition: Maximum 8.0 per cent, determined on 1.00 g at 900 ± 25 °C.
Dissolve 0.320 g in 20 ml of dilute hydrochloric acid and dilute to 100.0 ml with water. Using 20.0 ml of the solution, carry out the complexometric titration of magnesium. 1 ml of 0.1 M sodium edetate is equivalent to 4.030 mg of MgO.
Light Magnesium Oxide IP Grade Specifications
MgO ---- Mol.Wt.40.30
Description: Very fine, light, white powder, odourless. 15g occupies a volume of about 150ml.
Solubility: Practically insoluble in water, insoluble in ethanol(95%).It dissolves in dilute acids with at most slight effervescence.
Light Magnesium Oxide contains not less than 98.0 per cent and not more than 100.5per cent of MgO, Calculated with reference to the substance ignited at 900°C.
Arsenic; Heavy metals; Sulphates; Calcium; Soluble substances; Substances insoluble in acetic acid ; Loss on ignition :Complies with the requirements stated under Heavy Magnesium Oxide using, where appropriate, solution A and residue R prepared as described therein.
Colour of Solution: Prepare Solution A and residue R as described in the test for colour of solution under Heavy Magnesium Carbonate. Solution A is not more than intensely Coloured than reference solution.
Iron: Solution complies with the limit test for iron, Appendix 3.13 (0.1%).
Chloride: 4.0ml of solution A complies with the limit test for chlorides, Appendix 3.10(0.125%).
Magnesium Oxide FCC Food Grade Specifications
MgO Formula wt 40.30
INS: 530 CAS 1309-48-4
Magnesium Oxide occurs as a very bulky, white powder, known as Light Magnesium Oxide or as a relatively dense, white powder known as Heavy Magnesium Oxide. Five grams
of Light Magnesium Oxide occupies a volume of approximately 40 to 50 mL, while 5 g of Heavy Magnesium Oxide occupies a volume of approximately 10 to 20 mL. It is soluble in dilute acids, practically insoluble in water, and insoluble in alcohol.
Function: pH control; neutralizer; anticaking agent; freeflowing agent; firming agent.
Labeling: Indicate whether it is Light Magnesium Oxide or Heavy Magnesium Oxide.
Identification: A solution of sample in 2.7 N hydrochloric acid gives positive tests for Magnesium, Appendix IIIA.
Assay: Not less than 96.0% and not more than 100.5% of MgO after ignition.
Acid-Insoluble Substances: Not more than 0.1%.
Alkalies (Free) and Soluble Salts: Passes test.
Arsenic: Not more than 3 mg/kg.
Calcium Oxide: Not more than 1.5%.
Lead: Not more than 4 mg/kg.
Loss on Ignition: Not more than 10.0%.
Assay: Ignite about 500 mg of sample to constant weight at 800° _ 25° in a tared platinum crucible, accurately weigh the residue, dissolve it in 30.0 mL of 1 N sulfuric acid, boil gently to remove any carbon dioxide, cool, add methyl orange TS, and titrate the excess acid with 1 N sodium hydroxide. From the volume of 1 N sulfuric acid consumed deduct the volume of 1 N sulfuric acid corresponding to the content of calcium oxide in the sample taken for the assay. The difference is the volume of 1 N sulfuric acid equivalent to the MgO in the sample taken. Each milliliter of 1 N sulfuric acid is equivalent to 20.15 mg of MgO and to 28.04 mg of CaO.
Acid-Insoluble Substances: Mix 2.0 g of sample with 75 mL of water, add hydrochloric acid in small portions, with agitation, until no more of the sample dissolves, and boil for 5 min. If an insoluble residue remains, filter it through a suitable tared porous-bottom porcelain crucible, wash well with water until the last washing is free from chloride, ignite at 800° _ 25° for 45 min, cool, and weigh.
Note: Avoid exposing the crucible to sudden temperature changes.
Alkalies (Free) and Soluble Salts: Boil 2 g of sample with 100 mL of water for 5 min in a covered beaker, and filter while hot. Add methyl red TS, and titrate 50 mL of the cooled filtrate with 0.1 N sulfuric acid. Not more than 2 mL of the acid is consumed. Evaporate 25 mL of the filtrate to dryness, and dry at 105° for 1 h. Not more than 10 mg of residue remains.
Arsenic: Determine as directed under Arsenic Limit Test, Appendix IIIB, using a solution of 1 g of sample in 10 mL of 2.7 N hydrochloric acid.
Calcium Oxide: Dissolve about 400 mg of sample, accurately weighed, in a mixture of 3 mL of sulfuric acid and 22 mL of water. Add 50 mL of alcohol, and allow the mixture to stand overnight. If crystals of magnesium sulfate separate, warm the mixture to about 50° to dissolve them. Filter through a suitable tared, porous-bottom porcelain crucible, previously washed with 2 N sulfuric acid, water, and alcohol. Wash the crystals on the porous disk several times with a mixture of 2 volumes of alcohol and 1 volume of 2 N sulfuric acid. Ignite the crucible and contents at 450° _ 25° to constant weight. The weight of calcium sulfate so obtained, multiplied by 0.4119, gives the equivalent of calcium oxide in the sample taken for the test.
Note: Avoid exposing the crucible to sudden temperature changes.
Lead: Determine as directed under Lead Limit Test, Appendix IIIB, using a solution of 1 g of sample in 20 mL of 2.7 N hydrochloric acid, and 4 _g of lead (Pb) ion in the control.
Loss on Ignition: Transfer about 500 mg of sample, accurately weighed, into a tared, covered, platinum crucible. Ignite at 800° _ 25° for 15 min, cool, and weigh.
Magnesium Oxide BP FCC Food grade Manufacturers:
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264
USA & Canadian Customers may e-mail: email@example.com
Old Spice: Manufacturing since more than Three Decades: Ammonium Chloride Calcium Chloride Magnesium Chloride Magnesium Sulfate Potassium Chloride Sodium Acetate Sodium Thiosulfate Zinc Chloride Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals Ammonium Chloride Benzyl Alcohol Boric Acid Borax; Sodium Borate Calcium Chloride Calcium Hydroxide Calcium Oxide Calcium Sulfate Calcium Phosphate Calcium Saccharate Chromic Chloride Citric Acid Gentian Violet Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Methylene Blue Maleic Acid Potassium Chloride Potassium Acetate Potassium Phosphate Sodium Acetate Sodium Hydroxide Pellets Sodium Phosphate Sodium Thiosulfate Sodium Propionate Zinc Chloride Other Best Seller Products: Ammonium Persulfate Ammonium Phosphate Aluminum Chloride Barium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Cupric Chloride Potassium Phosphate Sodium Formate Sodium Formaldehyde Bisulfite Sodium Nitrite Nitrate Sodium Phosphate Tertiary Butylhydroquinone Zinc Sulphate Zinc Ammonium Chloride Flux Oil Field Chemicals
Global or International Magnesium Oxide BP FCC Food Grade --- Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.