Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Thiosulfate Anhydrous & Pentahydrate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Sodium Thiosulfate Anhydrous Pentahydrate Manufacturers
Sodium Thiosulfate
Technical & Pure Crystals, Pea Crystal Pentahydrate & Anhydrous
CAS Number 10102-17-7 Pentahydrate and 7772-98-7 Anhydrous, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Sodium thiosulfate (Na2S2O3), also spelled Sodium thiosulphate, or thio sulphate is a colorless crystalline compound that is more familiar as the pentahydrate, Na2S2O3•5H2O. It is an efflorescent, monoclinic crystalline substance also called sodium hyposulfite or “hypo.”
Uses
It is used in Idometry, Gold Extraction, Medicine and several other
things.
Sodium thiosulfate is used as a component in hand warmers and
other chemical heating pads that produce heat by exothermic
crystallization of a super cooled solution.
Sodium thiosulphate is used in Bleach
In pH testing of bleach
substances.
To de-chlorinate tap water for
aquariums or treat effluent from waste water treatments prior to release
into rivers. The
amount of Sodium thiosulphate required can vary with the pH of the
water. A range of approximately 2 to 7 parts sodium thiosulfate to
neutralize one part chlorine is generally suggested. To
neutralize 1 liter of a 200 ppm chlorine solution, approximately 0.4 -
1.4 grams of sodium thiosulfate would be required.
It is used to lower chlorine levels in
swimming pools and spas following super chlorination.
It is used to remove iodine stains, e.g.
after the explosion of nitrogen triiodide.
Sodium thiosulphate is used in bacteriological water
assessment.
It is used in the tanning of leather.
It is
used in phase change material.
Sodium thiosulfate or Sodium
thiosulphate is used in paper industry.
It is used in medicine and as disinfectant.
It is
used
systemically for cyanide or arsenic poisoning and topically as an
antifungal.
It is used in electroplating.
As part of patina recipes for
copper alloys.
Often used in pharmaceutical
preparations as an anionic surfactant to aid in dispersion.
Sodium Thiosulfate Pentahydrate
ITC-HSN Code: 2832 30 10
CAS: 10102-17-7 (7772-98-7 Anhydrous)
Formula : Na2S2O3.5H2O
Molecular Weight: 248
Appearance: White
Crystalline
Sodium Thiosulphate Technical
|
Parameters |
Specifications |
|
Appearance |
Fine Crystalline |
|
pH of 10% Aqueous Solution |
6.5 to 8 |
|
Assay |
98% minimum |
|
Sulphites & Sulphates |
1% max |
|
Heavy Metals |
Less than 5 ppm |
|
Iron |
Less than 10 ppm |
Sodium Thiosulfate Pure
|
Parameters |
Specifications |
|
Appearance |
White Uniform Crystals (10 mesh) |
|
pH of 10% Aqueous Solution |
6.5 to 8 |
|
Assay |
99% minimum |
|
Sulphites & Sulphates |
0.2% max |
|
Heavy Metals |
Less than 5 ppm |
|
Iron |
Less than 10 ppm |
Sodium Thio Sulfate Photographic P4
|
Parameters |
Specifications |
|
Appearance |
Cylindrical Pellets (5 mm to 10 mm) |
|
pH of 10% Aqueous Solution |
6.5 to 8 |
|
Assay |
99.5% minimum |
|
Sulphites & Sulphates |
0.2% max |
|
Heavy Metals |
Less than 3 ppm |
|
Iron |
Less than 5 ppm |
Sodium Thio Sulphate Photographic P8 – Recommended For Water Treatment
|
Parameters |
Specifications |
|
Appearance |
Cylindrical Pellets (2 mm to 5 mm) |
|
pH of 10% Aqueous Solution |
6.5 to 8 |
|
Assay |
99.5% minimum |
|
Sulphites & Sulphates |
0.2% max |
|
Heavy Metals |
Less than 3 ppm |
|
Iron |
Less than 5 ppm |
We can give both the grades Pentahydrate and Anhydrous. We can give the technical grade small crystals and large crystals too.
Sodium Thiosulfate Anhydrous
Sodium Thiosulfate Anhydrous of similar specifications is offered
Sodium Thiosulfate Anhydrous Specifications
| Formula | (Na2) S2O3 |
| Molecular Weight | 158 |
| Assay as (Na2)S2O3 | 98 % Min. |
| 10% solution in water | Clear |
| pH of 10 % Solution | 6.5 To 8.5 |
| Description | White powder free from foreign particles. |
We offer Sodium Thiosulphate BP Sodium Thiosulphate IP, Sodium Thiosulfate USP, and Sodium Thiosulphate Ph. Eur. from our world class FDA approved, ISO-9001-2008 Certified facility, Anmol Chemicals
Information on IP, BP, USP, ACS, Food Grade is provided by manufacturer on Hypo Manufacturers USP ACS AR BP IP Food Grade
Sodium Thiosulfate anhydrous pentahydrate manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 23723564. FAX: 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Sodium Thiosulfate Pentahydrate Sodium Thiosulfate Anhydrous Pea Crystals BP USP IP ACS FCC Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
30-Apr-2022