Logo

Mubychem Group, established in 1976, is the pioneer manufacturer of Ammonium Bromide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter IndiaJumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Chemicals Container Leak Proof Drum Quick DeliveryProduct Image; Liquid ProductsExporter Importer

Ammonium Bromide Manufacturers, MSDS Sheet

MSDS of Ammonium Bromide

Ammonium Bromide BP FCC ACS AR Analytical Reagent Food Grade Manufacturers

Ammonium Bromide
Technical & Pure Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Ammonium Bromide

Ammonium Bromide MSDS Sheet; Material Safety Data Sheet

Material Safety Data Sheet

Section 1: Chemical Product and Identification

Product Name: Ammonium bromide
Synonym: -
Chemical Formula:
NH4Br
CAS No: 12124-97-9

Section 2: Composition and Information on Ingredients

Composition Name: Ammonium Bromide
CAS #:: 12124-97-9
% by Weight: 100

Section 3: Hazards Identification

Potential Acute Health Effects:
Hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Slightly hazardous in case of skin contact (permeator).

Potential Chronic Health Effects:
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
The substance is toxic to lungs, mucous membranes. Repeated or prolonged exposure to the substance can produce target organs damage.

Section 4: First Aid Measures

Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
Skin Contact:
In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Get medical attention.
Serious Skin Contact
: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Serious Inhalation
: Not available.
Ingestion:
Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician. immediately. Loosen tight clothing such as a collar, tie, belt or waistband.

Section 5: Fire and Explosion Data

Flammability of the Product: Non-flammable.
Fire Hazards in Presence of Various Substances:
Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Media and Instructions:
Not applicable.

Section 6: Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to authority requirements.
Large Spill:
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and drain.

Section 7: Handling and Storage

Precautions: Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes.
Storage:
Keep container tightly closed. Keep container in a cool, well-ventilated area.

Section 8: Exposure Controls/Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection:
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist before handling this product.
Exposure Limits:
Not available.

Section 9: Physical and Chemical Properties

Physical state and appearance: White solid.
Molecular Weight:
97.94 g/mole
pH (1% soln/water):
Not available.
Boiling Point:
Not available.
Melting Point:
Sublimes.
Specific Gravity:
2.429 (Water = 1)
Vapor Pressure:
Not applicable.
Solubility:
Easily soluble in cold water.

Section 10: Stability and Reactivity Data

Stability: The product is stable.
Instability Temperature:
Not available.
Corrosivity
: Non-corrosive in presence of glass.
Polymerization:
Will not occur.

Section 11: Toxicological Information

Routes of Entry: Eye contact. Inhalation. Ingestion.
Toxicity to Animals:
LD50: Not available.
LC50: Not available.
Chronic Effects on Humans:
Causes damage to the following organs: lungs, mucous membranes.
Other Toxic Effects on Humans:
Hazardous in case of skin contact (irritant), of ingestion, of inhalation.
Slightly hazardous in case of skin contact (permeator).
Special Remarks on Chronic Effects on Humans
: Passes through the placental barrier in human.

Section 12: Ecological Information

Ecotoxicity: Not available.
BOD5 and COD:
Not available.
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation:
The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation:
Not available.

Section 13: Disposal Considerations

Check with all applicable local, regional, and national laws and regulations. Local regulations may be more stringent than regional or national regulations. Small amounts of this material may be suitable for sanitary sewer or trash disposal.

Section 14: Transport Information

DOT Classification: Not a DOT controlled material (United States).
Identification:
Not applicable.

Section 15: Other Regulatory Information

Federal and State Regulations:
Pennsylvania RTK: Ammonium bromide
Massachusetts RTK: Ammonium bromide
TSCA 8(b) inventory: Ammonium bromide
Other Regulations:
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
Other Classifications:
WHMIS (Canada):
CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
DSCL (EEC):
R36/38- Irritating to eyes and skin.

HMIS (U.S.A.):

Health Hazard: 2; Fire Hazard: 0; Reactivity: 0; Personal Protection: E

National Fire Protection Association (U.S.A.):
Health:
2; Flammability: 0; Reactivity: 0

Protective Equipment:
Gloves.
Lab coat.
Dust respirator.
Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate.
Splash goggles.

Section 16: Other Information

Disclaimer:
**********************************
Our company provides this Ammonium Bromide MSDS information sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This Ammonium Bromide MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
**********************************

Ammonium Bromide manufacturers at:

MUBYCHEM GROUP
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: usa@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Isatoic Anhydride Methyl & Dimethyl Anthranilate
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux  

Ammonium Bromide BP FCC ACS Food Grade Manufacturers

Global or International Ammonium Bromide Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.