Mubychem Group, established in 1976, is the pioneer manufacturer of Diammonium Phosphate Ammonium Phosphate Dibasic, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Diammonium Phosphate Dibasic Ammonium Phosphate Dibasic Manufacturers, MSDS Sheet
Monoammonium Phosphate Mono Monobasic Ammonium Phosphate Monobasic Manufacturers
Diammonium Phosphates Di Dibasic Ammonium Phosphate Dibasic Manufacturers
MSDS of Mono Monoammonium Monobasic Ammonium Phosphate Monobasic Manufacturers
MSDS of Di Diammonium Dibasic Ammonium Phosphate Dibasic Manufacturers
Dibasic Ammonium Phosphate Dibasic Diammonium Phosphate MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Phosphoric acid di ammonium salt; di ammonium phosphate; DAP; di ammonium phosphate, diammonium phosphate.
CAS No.: 7783-28-0
Molecular Weight: 132.06
Chemical Formula: (NH4)2HPO4
2. Composition/Information on IngredientsIngredient: Diammonium Phosphate Dibasic Di Ammonium Phosphate
CAS No.: 7783-28-0
Percent: 98 - 100%
3. Hazards IdentificationEmergency Overview
WARNING! CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. HARMFUL IF SWALLOWED OR INHALED
Potential Health Effects
Inhalation: Diammonium Phosphate causes irritation to the respiratory tract. Symptoms may include coughing, shortness of breath.
Ingestion: Causes irritation to the gastrointestinal tract. Symptoms may include nausea, vomiting and diarrhea.
Skin Contact: Causes irritation to skin. Symptoms include redness, itching, and pain.
Eye Contact: Causes irritation, redness, and pain.
Chronic Exposure: No information found.
Aggravation of Pre-existing Conditions: No information found.
4. First Aid MeasuresInhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention.
5. Fire Fighting MeasuresFire: Di Ammonium Phosphate is not considered to be a fire hazard.
Explosion: Di Ammonium Phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire over Diammonium Phosphate.
Special Information: Use protective clothing and breathing equipment appropriate for the surrounding fire while tackling fire over Di Ammonium Phosphate .
6. Accidental Release MeasuresVentilate area of leak or spill of Diammonium Phosphate. Wear appropriate personal protective equipment.
Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue of Di Ammonium Phosphate may be flushed to sewer with plenty of water.
7. Handling and StorageKeep Diammonium Phosphate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate Di Ammonium Phosphate from incompatible substances. Diammonium Phosphate containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal ProtectionAirborne Exposure Limits: None established.
Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for Di Ammonium Phosphate . However, if conditions of use create discomfort to the worker, a local exhaust system should be considered.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: For Di Ammonium Phosphate wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions of Di Ammonium Phosphate is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical PropertiesAppearance: Diammonium Phosphate is white crystals.
Odor: Di Ammonium Phosphate is Odorless.
Solubility: 1g/1.7ml water.
Specific Gravity: 1.62
pH: ca. 8.0
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: Di Ammonium Phosphate at 155C (311F) Decomposes.
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and ReactivityStability: Di Ammonium Phosphate stable under ordinary conditions of use and storage. Di Ammonium Phosphate gradually loses about 8% ammonia on exposure to air.
Hazardous Decomposition Products: Burning may produce ammonia and oxides of phosphorus.
Hazardous Polymerization: Will not occur.
Incompatibilities: Sodium hypochlorite.
Conditions to Avoid: Incompatibles.
11. Toxicological InformationNo LD50/LC50 information found relating to normal routes of occupational exposure.
12. Ecological InformationEnvironmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal ConsiderationsWhatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Diammonium Phosphate container and unused contents in accordance with federal, state and local requirements.
14. Transport InformationNot regulated.
15. Regulatory InformationAustralian Hazchem Code: None allocated.
Poison Schedule: None allocated.
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
WHMIS (Canada): CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
DSCL (EEC): R38- Irritating to skin. R41- Risk of serious damage to eyes.
Health Hazard: 2
Fire Hazard: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.
16. Other InformationDisclaimer:
Our company provides this DI DIAMMONIUM PHOSPHATE, DIBASIC AMMONIUM PHOSPHATE DIBASIC MSDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This DI AMMONIUM PHOSPHATE DIBASIC OR DIAMMONIUM PHOSPHATE MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Di Diammonium Phosphate Dibasic Ammonium Phosphate Dibasic Manufacturers:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: email@example.com
Copyright and Usual Disclaimer is Applicable.
Old Spice: Manufacturing since more than Three Decades: Ammonium Chloride Calcium Chloride Magnesium Chloride Magnesium Sulfate Potassium Chloride Sodium Acetate Sodium Thiosulfate Zinc Chloride Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals Ammonium Chloride Benzyl Alcohol Boric Acid Borax; Sodium Borate Calcium Chloride Calcium Hydroxide Calcium Oxide Calcium Sulfate Calcium Phosphate Calcium Saccharate Chromic Chloride Citric Acid Gentian Violet Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Methylene Blue Maleic Acid Potassium Chloride Potassium Acetate Potassium Phosphate Sodium Acetate Sodium Hydroxide Pellets Sodium Phosphate Sodium Thiosulfate Sodium Propionate Zinc Chloride Other Best Seller Products: Ammonium Persulfate Ammonium Phosphate Aluminum Chloride Barium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Cupric Chloride Isatoic Anhydride Methyl & Dimethyl Anthranilate Potassium Phosphate Sodium Formate Sodium Formaldehyde Bisulfite Sodium Nitrite Nitrate Sodium Phosphate Tertiary Butylhydroquinone Zinc Sulphate Zinc Ammonium Chloride Flux
Global or International Di Diammonium Dibasic Ammonium Phosphate Dibasic Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.