Logo

Mubychem Group, established in 1976, is the pioneer manufacturer of Caustic Soda Sodium Hydroxide Pellets, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter IndiaJumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.Chemicals Container Leak Proof Drum Quick DeliveryProduct Image; Liquid ProductsExporter Importer

Caustic Soda Sodium Hydroxide Pellets Manufacturers, MSDS Sheet

MSDS of Caustic Soda Sodium Hydroxide Pellets Manufacturers

Sodium Hydroxide Caustic Soda BP USP NF IP ACS Analytical Reagent FCC Food Grade Pellets Manufacturers

Sodium Hydroxide Pellets
Caustic Soda Pellets Technical & Pure Tablets
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Sodium Hydroxide Pellets

Sodium Hydroxide Pellets MSDS Sheet, Material Safety Data Sheet

Section 1: Product Identification

Synonyms: Caustic Soda Pellets; Sodium Hydroxide solid; Sodium Hydrate; Sodium Hydroxide Pellets
CAS No.: 1310-73-2
Molecular Weight: 40.00
Chemical Formula: NaOH

Section 2: Composition / Information on Ingredients

Ingredient: Sodium Hydroxide Pellets
CAS No.: 1310-73-2
Percent: 99 - 100%
Hazardous: Yes

Section 3: Hazard Identification

Emergency overview
Immediate effects: Danger! Poison! Causes severe respiratory tract, eye and skin burns. May be fatal if swallowed. Harmful if inhaled. Cause damage to the following organs: Respiratory tract, skin, eye lens or cornea

Potential health effects
Primary Routes of entry: Absorbed through skin. Eye contact. Inhalation. Ingestion.
Signs and Symptoms of Overexposure: Causes severe burns on contact with any body tissue.  Vapor is irritating to the eyes and respiratory passages.
Eyes: Sodium Hydroxide Pellet is Extremely hazardous in case of eye contact ( corrosive). Causes severe eye burns.
Skin: Extremely hazardous in case of skin contact ( corrosive). Skin contact produces severe burns. Hazardous in case of skin contact (permeator).
Ingestion: Extremely hazardous in case of ingestion. May be fatal if swallowed.
Inhalation: Extremely hazardous in case of inhalation ( lung corrosive). Hazardous in case of inhalation.
Chronic Exposure: Extremely toxic and corrosive.
Chemical Listed As Carcinogen Or Potential Carcinogen: No.

Section 4: First Aid Measures

Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eye with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention immediately.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Call a physician, immediately. Wash clothing before reuse..
Ingestion: If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to and unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.
Medical Conditions generally Aggravated by Exposure: Repeated exposure of the eyes to a low level of Sodium hydroxide dust can produce eye irritation. Repeated skin exposure can produce local skin destruction, or dermatitis. Repeated inhalation of dust can produce varying degree of respiratory irritation or lung damage. 

Section 5: Fire Fighting Measures

Flash Point: NA
Fire Extinguishing Media: NA
Special Fire Fighting Procedures: NA.
Unusual Fire and Explosion Hazards: Flammable hydrogen gas may be produced on prolong contact with metals such as aluminum, tin lead and zinc.
Hazardous combustion products: NA 

Section 6: Accidental Release Measures

Steps to be Taken in Case Material is Released or Spilled: Evacuate the area of all unnecessary personnel. Wear suitable protective equipment.  Eliminate any ignition sources until the area is determined to be free from explosion or fire hazards. Contain the release and eliminate its source, if this can be done without risk. Take up and containerize for proper disposal.  Comply with local, state and Federal regulations on reporting releases. Refer to regulatory information for reportable quantity and other regulatory data.
Waste Disposal Methods: Dispose of waste according to Federal, State and Local Regulations.

Section 7: Handling and Storage

Keep Sodium hydroxide Pellets in a tightly closed container. Protect from physical damage. Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. Always add the caustic to water while stirring; never the reverse. Containers of Sodium hydroxide may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Do not store with aluminum or magnesium. Do not mix with acids or organic materials.

Section 8: Exposure Controls / Personal Protection

Engineering Controls Ventilation required:  Sodium hydroxide should be handled or transferred in an approved fume hood or with adequate ventilation.
Personal Protection Equipment
Respiratory protection: If workplace exposure limit (s) of product or any component is exceeded (see TLV/PEL), a NIOSH/MSHA approved air supplied respirator is advised in absence of proper environmental control. OSHA regulations also permit other NIOSH/MSHA respirator (negative pressure type) under specified conditions (see your safety equipment supplier). Engineering and/or administrative controls should be implemented to reduce exposure.
Protective gloves: Nitrile or equivalent.
Skin protection: Impervious, protective clothing.
Eye protection: Safety glasses with side shields must be worn at all times.
Additional clothing and/or equipment: Eyewash and safety equipment should be readily available.

Section 9 Physical and Chemical Properties

Appearance and Physical State:  Sodium hydroxide is white Solid (flakes, pellets or granular)
Odor (threshold): Odorless.
Specific Gravity (H2O=1): 2.13
Vapor Pressure (mm Hg): NA
Vapor Density (air=1): NA
Melting Point: 318C (604F)
Boiling Point: 1390.04C (2534.1F)
Freezing point / melting point: 318.38C (605.1F)
pH: ND
Solubility in Water: Soluble

Section 10: Stability and Reactivity

Stability: Sodium hydroxide is stable under ordinary conditions of use and storage. Very hygroscopic.
Conditions to Avoid: Contact with moisture may generate sufficient heat to ignite surrounding combustible material.
Materials to Avoid (Incompatibility): Water, acids, chlorinated hydrocarbons, metals, and organic materials.
Hazardous Decomposition Products: None indicated.
Hazardous Polymerization: Will not occur.

Section 11: Toxicological Information

Results of component toxicity test performed: ORL-rabbit LDLO: 500mg/kg.  Tests on laboratory animals indicate material may produce adverse mutagenic effects.
Human experience: Extremely hazardous in case of eye contact ( corrosive). Causes severe eye burns.

Extremely hazardous in case of skin contact (corrosive). Skin contact produces severe burns. Hazardous in case of skin contact (permeator). Extremely hazardous in case of inhalation ( lung corrosive). Hazardous in case of inhalation. Extremely hazardous in case of ingestion. May be fatal if swallowed. This product does not contain any compounds listed by NTP or IARC or regulated by OSHA as a carcinogen.

Section 12: Ecological Information

Environmental Fate: No information found.
Environmental Toxicity: No information found.

Section 13 Disposal Considerations

RCRA 40 CFR 261 Classification: Material does not have an EPA Waste Number and is not a listed waste.

Federal, State and local laws governing disposal of materials can differ. Ensure proper disposal compliance with proper authorities before disposal.

Section 14: Transportation Information

US DOT Information:
Proper shipping name: Sodium Hydroxide, solid
Hazard Class: 8
Packaging group: II
UN Number: UN1823

IATA:
Proper shipping name: Sodium Hydroxide, solid
Hazard Class: 8
Packing group: II
UN Number: UN1823

IMO:
Proper shipping name: Sodium Hydroxide, solid
Class: 8
UN Number: UN1823
Packing group: II
EMS: ND
MFAG: ND

Marine Pollutant: No
Canadian TDG: ND

Section 15: Regulatory Information

SARA: 302/304/311/312 extremely hazardous substances: No products were found.
SARA Title III: 302/304 emergency planning and notification: No products were found.
RCRA: Material does not have an EPA Waste Number and is not a listed waste.
TSCA: 8(b) inventory: Sodium Hydroxide
CERCLA: 1000 lbs.
California Proposition 65: None
Canada WHMIS: Class D-1B: Material causing immediate and serious toxic effects (TOXIC). Class E: corrosive solid.
CEPA DSL: Sodium Hydroxide.
Europe EINECS Numbers No Data: 215-185-5

OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200). EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
WHMIS (Canada): CLASS E: Corrosive solid.
DSCL (EEC):
R35- Causes severe burns. S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S37/39- Wear suitable gloves and eye/face protection. S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
HMIS (USA):
Health Hazard: 3
Fire Hazard: 0
Reactivity: 2
Personal Protection: J
National Fire Protection Association (USA):
Health: 3
Flammability: 0
Reactivity: 1
Specific hazard:
Protective Equipment:
Gloves. Synthetic apron. Vapor and dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.

Section 16: Other Information

Disclaimer:
******************************
Our company provides this Caustic Soda Sodium hydroxide MSDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium Hydroxide MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
******************************

Caustic Soda Sodium Hydroxide Manufacturers:

MUBYCHEM GROUP
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: usa@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Isatoic Anhydride Methyl & Dimethyl Anthranilate
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux  

Sodium Hydroxide Caustic Soda Pellets Manufacturers

Global or International Sodium Hydroxide Pellets or Caustic Soda Pellets BP USP AR ACS Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.