Mubychem Group, established in 1976, is the pioneer manufacturer of Speciality Chemicals, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
![]()
![]()
![]()
![]()
Go to Sodium Acetate Go to Sodium Diacetate Go to Sodium Thiosulfate
This page is under maintainance.
e-mail: anmol@pcmenergy.com
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264e-mail: anmol@pcmenergy.com
Copyright and Usual Disclaimer is Applicable.
Sodium Acetate Manufacturers Anhydrous Trihydrate
CAS: 127-09-3 (Anhydrous); 6131-90-4 (Trihydrate)
Chemical Formula: CH3COO-Na
Molecular Weight: 82Sodium Acetate BP USP ACS AR Food Grade
Sodium Acetate Manufacturers MSDSSodium Acetate
Anhydrous, Powder, Crystals, Trihydrate
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
SPECIFICATIONS
SODIUM ACETATE TRIHYDRATE PURE
SODIUM ACETATE TRIHYDRATE TECHNICAL
Assay
99% Sodium Acetate Trihydrate minimum
98% Sodium Acetate Trihydrate minimum
Appearance
White Transparent Crystalline
Off-White Crystalline
Test Solution
A 10% Solution is clear & colourless
A 10% Solution is clear & colourless
pH
7.5-9
7.5-9
Arsenic
Less than 1 ppm
Less than 1 ppm
Calcium & Magnesium
Less than 50 ppm
Less than 100 ppm
Heavy Metals
Less than 1 ppm
Less than 10 ppm
Iron
Less than 5ppm
Less than 10 ppm
Chlorides
Less than 0.03%
Less than 0.5%
Sulphates
Less than 0.02%
Less than 0.5%
Packing
As required
As required
GRADES AND SPECIFICATIONS OF SODIUM ACETATE ANHYDROUS POWDER.
SPECIFICATIONS
SODIUM ACETATE ANHYDROUS PURE
SODIUM ACETATE ANHYDROUS TECHNICAL
Purity
99 % minimum purity as CH3COONa
98.5% minimum purity as CH3COONa
Appearance
Snow-White Powder
White to Off-White Powder
Clarity of 10% Solution
A 10% Solution w/v is clear and colourless
A 10% Solution w/v is clear
pH (10% in water)
pH between 7.5-9
pH between 7.5-9
Arsenic
Arsenic < 1ppm.
Arsenic < 1ppm.
Calcium and Magnesium
To pass the test 50 ppm
To pass the test 100 ppm
Heavy Metals
Heavy Metals < 1ppm
Heavy Metals < 10ppm
Iron
Iron < 5ppm
Iron < 10ppm
Chloride
Chloride < 100ppm
Chloride <0.5%
Sulphate < 225ppm
Sulphate < 20ppm
Sulphate <0.5%
Packing
25kg(55 lbs)-50kg bags or pellets or as required
We offer Sodium Acetate IP Sodium Acetate BP Sodium Acetate USP Sodium Acetate Ph. Eur. and Extra Pure from our world class FDA approved, ISO-9001-2008 Certified facility, Anmol Chemicals
Sodium Acetate Trihydrate & Anhydrous AR Analytical Reagent GR Guaranteed Reagent
Sodium Acetate ACS AR Analytical Reagent grade specifications
American Chemical Society Reagent Grade
Sodium Acetate Anhydrous
CH3COONa
Formula Wt 82.03
CAS Number 127-09-3REQUIREMENTS
Assay: 99.0% C2H3O2Na
pH of a 5% solution: 7.0-9.2 at 25CMAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on drying at 120C: 1.0%
Chloride (Cl): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Sodium Diacetate Manufacturers
Sodium Diacetate Specifications
Sodium Diacetate Manufacturers MSDS
Sodium Thiosulphate ; Sodium Thiosulfate Manufacturers
Hypo MSDS
Sodium Thiosulfate Manufacturers BP IP USP ACS AR FCC Food GradeWe offer Sodium Thiosulphate BP IP, Sodium Thiosulfate USP, and Sodium Thiosulfate Extra Pure from our world class FDA approved, ISO-9001-2008 Certified facility, Anmol Chemicals
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo itPerfection is made up of small thing but it is not small.
23-Jun-2025