Mubychem Group, established in 1976, is the pioneer manufacturer of EDTA Edetic Acid, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
EDTA Edetic Acid BP Ph Eur Edetic Acid USP Grade Manufacturers
MSDS EDTA, Ethylene Diamine Tetra Acetic Acid Manufacturers
Edetic Acid
EDTA; Ethylene dinitrilo tetra acetic acid; Ethylene diamine tetra acetic
acid
CAS Number 60-00-4, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Edetic Acid BP Ph Eur, EDTA BP Ph Eur Grade Specifications
C10H16N2O8
-- 292.2 -- CAS Number 60-00-4
Edetic Acid EDTA
Action and use
Chelating agent; pharmaceutical aid.
DEFINITION
(Ethylenedinitrilo)tetraacetic acid.
Content
98.0 per cent to 101.0 per cent. (EDTA)
CHARACTERS
Appearance
White or almost white, crystalline powder or colourless crystals.
Solubility
Practically insoluble in water and in ethanol (96 per cent). It
dissolves in dilute solutions of alkali hydroxides.
IDENTIFICATION
First identification: A.
Second identification: B, C.
A. Infrared absorption spectrophotometry as per prescribed
method.
B. To 5 ml of
water add 0.1 ml of ammonium thiocyanate
solution and 0.1 ml of ferric chloride solution and mix. The
solution is red. Add 0.5 ml of solution S (see Tests). The solution becomes
yellowish.
C. To 10 ml of solution S add 0.5 ml of
calcium chloride solution.
Make alkaline to red litmus paper by the addition of dilute
ammonia and add 3 ml of ammonium oxalate solution. No precipitate
is formed.
TESTS
Solution S
Dissolve 5.0 g in 20 ml of dilute sodium hydroxide solution
and
dilute to 100 ml with water.
Appearance of solution
Solution S is clear and colourless.
Impurity A
Liquid chromatography.
Carry out the test protected from light.
As per Monograph
—impurity A: not more than the area of the corresponding peak in the
chromatogram obtained with the reference solution (0.1 per cent).
Chlorides
Maximum 200 ppm.
Iron
Maximum 80 ppm.
Heavy metals
Maximum 20 ppm.
Sulphated ash
Maximum 0.2 per cent, determined on 1.0 g.
Edetic Acid USP Grade Specifications
Edetic Acid USP
EDTA
C10H16N2O8 292.24
Glycine,
N,N′-1,2-ethanediylbis[N-(carboxymethyl)-.
(Ethylenedinitrilo)tetraacetic acid [CAS 60-00-4].
Edetic Acid contains not less than 98.0 percent and not more than 100.5 percent of C10H16N2O8.
Identification: Infrared Absorption
197K.
Residue on ignition:
not more than 0.2%.
Heavy metals: 0.003%.
Iron— Char 3.0 g thoroughly, and heat in an oven at 500 until most of
the carbon is consumed. Cool, add 0.15 mL of nitric acid, and heat at 500
until all of the carbon is consumed. Dissolve the residue in 2 mL of a
mixture of equal volumes of hydrochloric acid and water, digest in a covered
dish on a steam bath for 10 minutes, remove the cover, and evaporate to
dryness. Dissolve the residue in 1 mL of 1 N acetic acid and 20 mL of hot
water, digest for 5 minutes on a steam bath, cool, and dilute with water to
30 mL. To 2.0 mL of this solution add 2 mL of hydrochloric acid, and dilute
with water to 50 mL. Add about 50 mg of ammonium persulfate and 3 mL of
ammonium thiocyanate solution (3 in 10), mix, and transfer to a
color-comparison tube. Treat in the same manner 2.0 mL of a solution of
ferric ammonium sulfate, prepared by dissolving 43.2 mg of ferric ammonium
sulfate in 10 mL of 2 N sulfuric acid and adding water to make 1000 mL, each
mL representing 5 :g of Fe. The color of the test solution is not deeper
than that of the solution containing the standard iron solution (0.005%).
Limit of nitrilotriacetic acid— To pass the test
EDTA Edetic Acid BP USP Manufacturers Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Global or International Edetic Acid or EDTA Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
29-Apr-2022