Mubychem Group, established in 1976, is the pioneer manufacturer of Aluminum Chloride Anhydrous & Hexahydrate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Aluminum Chloride Anhydrous Aluminum Chloride Hexahydrate Manufacturers
MSDS of Aluminum Chloride Anhydrous Manufacturers
MSDS of Aluminium Chloride Hexahydrate Manufacturers
Aluminum Chloride
CAS Number 7784-13-6 Technical & Pure; Anhydrous & Hexahydrate Crystals
Aluminium Chloride Anhydrous or Anhydrous Aluminum Chloride
Specifications of Anhydrous Aluminum Chloride or Aluminum Chloride Anhydrous
|
Aluminium Chloride Anhydrous |
As per IS: 6614-1972 |
Our Guaranteed |
|
Assay, percent by mass, min |
98% |
98.5% |
|
Insoluble matter, percent by mass, max |
0.5% |
0.4% |
|
pH of 5% solution |
3-4.5 |
3-4.5 |
Anhydrous Aluminium Chloride or Aluminum Chloride Anhydrous is available in two forms viz. Powder and Crystals:
|
Characteristic |
Aluminium Chloride Powder |
Aluminium Chloride Crystals |
|
Particle Size |
0-2 mm |
2-10 mm |
|
Colour |
Yellowish-Grey-Greenish |
Yellowish-Grey-Greenish |
|
Odor |
Hydrochloric Acid Odor |
Hydrochloric Acid Odor |
Packing: In 25 HDPE bags with liners or 50 kg MS or HDPE drums with liners.
Aluminium Chloride Hexahydrate or Aluminum Chloride Hexahydrate
Aluminum Chloride Hexahydrate Grade 1
AlCl3·6H2O 241.43
Aluminum chloride, hexahydrate.
Aluminum chloride hexahydrate [CAS 7784-13-6].
Aluminum Chloride contains not less than 95.0 percent and not more than
102.0 percent of AlCl3, calculated on the anhydrous basis. The average
COA is 98%.
Water: between 42.0% and 48.0%.
Sulfate— The addition of 0.2 mL of barium chloride TS to 10 mL of a
solution (1 in 100) produces no turbidity within 1 minute.
Limit of alkalies and alkaline earths— To a boiling solution of 1.0 g in
150 mL of water add a few drops of methyl red TS, then add 6 N ammonium
hydroxide until the color of the solution just changes to a distinct
yellow. Add hot water to restore the volume to 150 mL, and filter while
hot.
Evaporate 75 mL of the filtrate to dryness, and ignite to constant
weight: the weight of the residue does not exceed 2.5 mg (0.5%).
Heavy metals, Method — the limit is 0.002%.
Iron — 0.001%.
Aluminum Chloride
Hexahydrate Grade 2
AlCl3·6H2O 241.43
Aluminum chloride, hexahydrate.
Aluminum chloride hexahydrate [CAS 7784-13-6].
Assay: 95.5% min
Fe: 0.025% max
Water insoluble: 0.1% max
As: 0.00002% max
Hg: 0.00002% max
Pb: 0.0005% max
Packing: 25kgs net new plastic woven bag1x20'FCL=20mts with pallet.
Aluminium Chloride, Aluminum Chloride Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Aluminium Aluminum Chloride Anhydrous & Aluminium Chloride Hexahydrate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
28-Apr-2022