Mubychem Group, established in 1976, is the pioneer manufacturer of Magnesium Sulfate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Magnesium Sulphate BP Ph Eur Magnesium Sulfate USP FCC Food grade ACS Manufacturers
Magnesium Sulfate Sulphate Heptahydrate Anhydrous
MSDS of Magnesium Sulfate Sulphate Anhydrous Manufacturers
Magnesium Sulfate
Technical & Pure Crystals, Anhydrous, Monohydrate, Heptahydrates
CAS Number 14168-73-1 & 10034-99-8 & 7487-88-9 & 15244-36-7, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Magnesium Sulfate Magnesium Sulphate
Dried Magnesium Sulphate
Dried Magnesium Sulphate BP Ph Eur Grade Specifications (Magnesium Sulfate)
Dried Epsom Salts
Preparation
Magnesium Sulphate Paste
DEFINITION
Dried Magnesium Sulphate contains
not less than 62.0% and not more than 70.0% of MgSO4.
It may be prepared by drying
magnesium sulphate at 100° until it has lost approximately 25% of its weight.
CHARACTERISTICS
A white powder.
Freely soluble in water;
dissolves more rapidly in hot water.
IDENTIFICATION
Yields the reactions
characteristic of magnesium salts and of sulphates.
TESTS
Acidity or alkalinity
To 10 ml of a 7.5% w/v solution
in carbon dioxide-free water add 0.05 ml of phenol red solution.
Not more than 0.2 ml of either 0.01M hydrochloric acid VS or 0.01M sodium hydroxide VS
is required to change the colour of the solution.
Arsenic
0.33 g dissolved in 25 ml of water
complies with the limit test for arsenic, (3 ppm).
Heavy metals
Dissolve 1.3 g in 20 ml of water
and add 1 g of ammonium chloride. 12 ml of the resulting
solution complies with limit test A for heavy metals, Appendix VII. Use
lead standard solution(1 ppm Pb) to prepare the standard (15 ppm).
Iron
0.33 g dissolved in 10 ml of water
complies with the limit test for iron, Appendix VII (30 ppm).
Chloride
0.13 g dissolved in 15 ml of water
complies with the limit test for chlorides, Appendix VII (400
ppm).
Insoluble matter
7.5 g dissolves in 20 ml of water, producing a solution which may be slightly turbid at first but which
becomes clear in a few minutes.
Magnesium Sulphate Heptahydrate
Magnesium Sulphate Heptahydrate BP Ph Eur Grade Specifications (Magnesium Sulphate Heptahydrate )
Epsom Salts
MgSO4,7H2O -- 246.5 CAS Number 10034-99-8
Action and use
Osmotic laxative; used in
treatment of electrolyte deficiency.
DEFINITION
Content
99.0 per cent to 100.5 per cent
(dried substance).
CHARACTERS
Appearance
White or almost white,
crystalline powder or brilliant, colourless crystals.
Solubility
Freely soluble in water, very
soluble in boiling water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. It gives the reactions of
sulphates.
B. It gives the reaction of
magnesium.
TESTS
Solution S
Dissolve 5.0 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is clear and
colourless.
Acidity or alkalinity
To 10 ml of solution S add 0.05
ml of phenol red solution. Not more than 0.2 ml of 0.01 M hydrochloric
acid or 0.01 M sodium hydroxide is required to change the colour of
the indicator.
Chlorides
Maximum 300 ppm.
Arsenic
Maximum 2 ppm, determined on 0.5
g.
Iron
Maximum 20 ppm.
Heavy metals
Maximum 10 ppm.
Loss on drying
48.0 per cent to 52.0 per cent,
determined on 0.500 g by drying in an oven at 110-120°C for 1 h and then at
400°C to constant mass.
Magnesium Sulfate USP Grade Specifications
MgSO4·xH2O
Sulfuric acid magnesium salt
(1:1), hydrate.
Magnesium sulfate (1:1)
monohydrate 138.36
Magnesium sulfate (1:1)
heptahydrate 246.48 [CAS 10034-99-8].
Anhydrous 120.37 [CAS 7487-88-9].
Magnesium Sulfate, rendered anhydrous by ignition, contains not less than 99.0 percent and not more than 100.5 percent of MgSO4.
Identification— A solution (1 in 20) resonds to the tests for Magnesium and for
Sulfate.
pH: between 5.0 and 9.2, in a solution (1 in 20).
Loss on drying— Dry it at 105 for 2 hours: the anhydrous form
loses not more than 2% of its weight.
Loss on ignition— Weigh accurately about 1 g in a crucible, heat
at 105 for 2 hours, then ignite in a muffle furnace at 450 ± 25 to constant
weight: the monohydrate loses between 13.0% and 16.0% of its weight, the dried
form loses between 22.0% and 28.0% of its weight, and the heptahydrate loses
between 40.0% and 52.0% of its weight.
Chloride— A 1.0-g portion shows no more chloride than corresponds
to 0.20 mL of 0.020 N hydrochloric acid (0.014%).
Iron—
FOR MAGNESIUM SULFATE INTENDED
FOR USE IN PREPARING NON-PARENTERAL DOSAGE FORMS—
Dissolve 0.50 g in 40 mL of water
and proceed as directed in the test for Iron: the limit is 20 µg per g.
FOR MAGNESIUM SULFATE INTENDED
FOR USE IN PREPARING PARENTERAL DOSAGE FORMS— the limit is 0.5 µg per g.
Heavy metals— Dissolve 2 g
in 25 mL of water: the limit is 0.001%.
Selenium— The limit is 0.003%.
Magnesium Sulfate FCC Food Grade Specifications Magnesium Sulphate
Epsom Salt
MgSO4·xH2O Formula wt,
monohydrate 138.38
Formula weight, heptahydrate 246.47
INS: 518 CAS: monohydrate
[CAS Number 14168-73-1]
CAS: heptahydrate [CAS 10034-99-8]
CAS: dried [CAS 15244-36-7]
DESCRIPTION
Magnesium Sulfate occurs as a
colorless crystal or a granular crystalline powder. It is produced with one or
seven molecules of water of hydration or in a dried form containing the
equivalent of about 2.3 waters of hydration. It is readily soluble in water,
slowly soluble in glycerin, and sparingly soluble in alcohol.
Function: Nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Magnesium and for
Sulfate.
Assay: Not less than 99.5% of MgSO4 after ignition.
Lead: Not more than 4 mg/kg.
Loss on Ignition Monohydrate: Between 13.0% and 16.0%; Heptahydrate: Between 40.0% and 52.0%;
Dried: Between 22.0% and
28.0%.
Selenium: Not more than 0.003%.
Magnesium Sulfate ACS ( Magnesium Sulphate )
Reagent Chemicals
ACS Specifications
Magnesium Sulfate Heptahydrate
MgSO4 .
7H2O
Formula
weight 246.48
CAS Number 10034-99-8
REQUIREMENTS
Assay .............. 98.0-102.0% MgSO4-7H2O
pH of a 5% solution- 5.0-8.2 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ... 0.005%
Chloride (Cl) ......
5 ppm
Nitrate (NO3) ......
0.002%
Ammonium (NH4) .....
0.002%
Calcium (Ca) ....... 0.02%
Manganese (Mn) .....
5 ppm
Potassium (K) ......
0.005%
Sodium (Na) ........
0.005%
Strontium (Sr) .....
0.005%
Heavy metals (as Pb)
5 ppm
Iron (Fe) ..........
5 ppm
Magnesium Sulphate BP Magnesium Sulfate USP FCC Food grade ACS manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: usa@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Magnesium Sulfate Anhydrous Monohydrate Heptahydrate BP USP IP ACS Analytical Reagent Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
29-Apr-2022