|
Mubychem Group, established in 1976, is the pioneer manufacturer of Aluminum Chloride Anhydrous, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Aluminium Chloride Aluminum Chloride Anhydrous Manufacturers MSDS Sheet
MSDS of Aluminium Chloride Hexahydrate Manufacturers
Aluminium Chloride Anhydrous, Aluminum Chloride Hexahydrate Manufacturers
Aluminum Chloride
Anhydrous
Technical & Pure Powder & Crystals
Aluminum Chloride Anhydrous MSDS Sheet, Material Safety Data Sheet Aluminium Chloride Anhydrous
1. Product Identification
Synonyms: Aluminum trichloride; Trichloro aluminum
CAS No.: 7746-70-0
EINECS: EC Number: 231-208-1
Molecular Weight: 133.34
Chemical Formula: AlCl3
2. Composition/Information on Ingredients
Ingredient: Aluminum Chloride Anhydrous or Aluminium Chloride
Anhydrous
CAS No.: 7746-70-0
Percent: 97 - 100%
Hazardous: Yes
3. Hazards Identification
Emergency Overview
DANGER! Highly Higroscopic. Causes burns on exposure by any route.
Material hydrolyzes in contact with moisture/water releasing toxic and corrosive
fumes of hydrogen chloride and aqueous hydrochloric acid.
Target Organs: Respiratory system, gastrointestinal system, eyes,
skin, mucous membranes.
OSHA Hazards: Hazardous.
HMIS Classification
Health hazard: 3
Flammability: 0
Physical hazards: 0
NFPA Rating
Health hazard: 3
Fire: 0
Reactivity Hazard: 0
Potential Health Effects
Inhalation: It may cause irritation to the respiratory tract.
Ingestion: Harmful if swallowed. It can irritate the digestive system.
Ingestion may cause burn to the mouth.
Skin Contact: It may cause irritation with redness and pain.
Serious contact may cause burns.
Eye Contact: Aluminium Chloride anhydrous contact may cause
irritation, redness, and pain.
Chronic Exposure: No information found for Aluminum Chloride
anhydrous.
Aggravation of Pre-existing Conditions: Persons with pre-existing
skin disorders or eye problems or impaired respiratory function may be
more susceptible to the effects of the substance.
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available. It may have mutagenic effect.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. Get
medical attention.
Ingestion: Never give anything by mouth to an unconscious person.
Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately
flush skin with plenty of water for at least 15 minutes. Remove
contaminated clothing and shoes. Get medical attention. Wash clothing
before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at
least 15 minutes, lifting lower and upper eyelids occasionally. Get
medical attention immediately.
Note to Physician: Treat symptomatically.
5. Fire Fighting Measures
Flammability of the Product: The product is not flammable.
Auto-Ignition Temperature: NA.
Flash Points: NA.
Flammable Limits: NA.
Products of Combustion: It forms oxides of aluminum and hydrochloric acid
when heated to decomposition.
Fire: Non flamable.
Explosion: not known.
Fire Extinguishing Media: Use dry chemical, foam, or carbon dioxide.
Special Information In the event of a fire, wear full protective clothing
and NIOSH-approved self-contained breathing apparatus with full face piece
operated in the pressure demand or other positive pressure mode. At high
temperatures or when moistened under fire conditions, it may produce toxic or
irritating fumes.
6. Accidental Release Measures
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate
ventilation. Use appropriate tools to put the spilled solid in a convenient
waste disposal container. Finish cleaning by spreading water on the contaminated
surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the
material into a convenient waste disposal container. Finish cleaning by
spreading water and swab.
7. Handling and Storage
Do not breathe dust. Wear suitable protective clothing. In case of insufficient
ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash
hands thoroughly after handling. Provide appropriate exhaust ventilation at
places where dust is formed. If you feel unwell, seek medical attention.
Keep Aluminium Chloride Anhydrous in a tightly closed container, stored in a
cool, dry, ventilated area. Protect against physical damage or contact with
oxidizing material and combustible substances. Avoid moisture and store away
from water sources. It is to be stored in corrosive area.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established. Assure it as below 2mg/m3.
Ventilation System: A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions of the
contaminant at its source, preventing dispersion of it into the general work
area.
Personal Respirators (NIOSH Approved): For conditions of use where
exposure to dust or mist is apparent and engineering controls are not feasible,
a particulate respirator may be worn. For emergencies or instances where the
exposure levels are not known, use a full-face positive-pressure, air-supplied
respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where
dusting or splashing of solutions is possible. Maintain eye wash fountain and
quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust
deposits on floors and other surfaces may pick up moisture and cause the
surfaces to become slippery and present safety hazards. Handle in accordance
with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Aluminum Chloride Anhydrous is yellowish crystals or powder
or granules.
Odor: Typical
Solubility: Readily soluble in water and it reacts with it.
pH: Not available.
Density: 2.45 gm/cc
Molecular Weight: 133.34
Molecular Formula: AlCl3
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Sublimes.
Melting Point: Sublimes
Vapor Density (Air=1): No information found
Vapor Pressure (mm Hg): No information found
Evaporation Rate (BuAc=1): No information found
10. Stability and Reactivity
Stability: Aluminium Chloride is stable under ordinary conditions of use
and storage. It must be kept in air tight containers.
Hazardous Decomposition Products: It produces oxides of aluminum along
with hydrochloric acid when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Reacts with metals and water including moisture.
Water, ethylene oxide, oxygen difluoride,
phenols, nitro compounds (organic, e.g. nitrobenzene, nitroglycerine, picric
acid, trinitrotoluene), perchloryl fluoride, benzene are reported incompatibles.
Conditions to Avoid: Moisture, Heat, Sun light, Incompatibles.
11. Toxicological Information
Routes of Entry: Inhalation, Ingestion, Contact.
Toxicity to Animals:
Skin, rabbit: LD50 = >2000 mg/kg;
Oral, mouse: LD50 = 1130 mg/kg;
Oral, rat: LD50 = 3450 mg/kg;
Special Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: It may have mutagenic effect.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Chronic Effects on Humans: No Causes damage to the following
organs: lungs, mucous membranes.
Other Toxic Effects on Humans: Hazardous in case of skin contact, of
ingestion, of inhalation.
Special Remarks on Chronic Effects on Humans: -
Special Remarks on other Toxic Effects on Humans: -
Acute Potential Health Effects:
Inhalation: Aluminum chloride anhydrous causes irritation and burns
to the respiratory tract and mucus membrane.
Ingestion: Harmful if swallowed. May cause irritation and burns
to the gastrointestinal tract.
Skin Contact: Aluminium chloride anhydrous causes irritation and
burns to skin.
Eye Contact: Causes irritation redness pain and burning of eyes.
Chronic Exposure: NA.
12. Ecological Information
Environmental Toxicity:
Toxicity to fish:
LC50 - Carassius auratus (goldfish) - 0.15 mg/l - 7 d
LC50 - Oncorhynchus mykiss (rainbow trout) - 7 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates:
EC50 - Daphnia magna (Water flea) - 3.9 mg/l - 48 h
Toxicity to algae:
EC50 - Pseudokirchneriella subcapitata (green algae) - 0.57 mg/l - 96 h
Biodegradability: -
BOD5 and COD: Not available.
Environmental Fate: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Aluminum chloride Anhydrous in accordance with federal, state and local requirements.
14. Transport Information
DOT (USA)
UN-Number: 1726 Class: 8 Corrosive Material Packing group: II
Proper shipping name: Aluminum Chloride Anhydrous
Marine pollutant: No
Poison Inhalation Hazard: No
IMDG
UN-Number: 1726 Class: 8 Corrosive Material Packing group: II; --
EMS-No: F-A, S-Q
Proper shipping name: Aluminum Chloride Anhydrous
Marine pollutant: No
IATA
UN-Number: 1726 Class: 8 Corrosive Material Packing group: II
Proper shipping name: Aluminum Chloride Anhydrous
15. Regulatory Information
OSHA Hazards: Hazardous.
SARA Codes: CAS # 7631-99-4: flammable.
SARA 302: No chemicals in this material are subject to the reporting
requirements of SARA Title III, Section 302.
Section 313: This material does not contain any chemical components with
known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.
SARA 311/312 Hazards: Acute Health Hazard Chronic Health Hazard.
TSCA: CAS# 7631-99-4 is on the TSCA Inventory.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals
in this material have an RQ.
California Prop 65:
This product does not contain any chemicals known to State of California
to cause cancer, birth defects, or any other reproductive harm.
Massachusetts Right To Know Components:
Aluminum Chloride anhydrous
CAS-No.: 7446-70-0
Pennsylvania Right To Know Components:
Aluminum Chloride anhydrous
CAS-No.: 7446-70-0
New Jersey Right To Know Components:
Aluminum Chloride anhydrous
CAS-No.: 7446-70-0
EINECS: EC Number: 231-208-1
European Labeling in Accordance with EC Directives
Hazard Symbols:
C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 28A After contact with skin, wash immediately with plenty of water.
S 45 In case of accident or if you feel unwell, seek medical advice
immediately.
WGK (Water Danger/Protection)
CAS# 7446-70-0: 1
Canada
CAS# 7446-70-0 is listed on Canada's DSL List
Canadian WHMIS Classifications: E, F
CAS# 7446-70-0 is listed on Canada's DSL List
Australian Hazchem Code: 4X
Poison Schedule: None
16. Other Information
Disclaimer:
**********************************
Our company provides this Aluminum chloride anhydrous MSDS sheet in good faith
but makes no representation as to its comprehensiveness or accuracy. This
Aluminium chloride anhydrous MSDS sheet is intended only as a guide to the
appropriate precautionary handling of the material by a properly trained person
using this product. The above information has been compiled from various sources
and has the possibility of discrepancy and being out-dated information.
Individuals receiving the information must exercise their independent judgment
and do further search in determining its appropriateness for a particular
purpose. In no case shall our company be liable to loss or damages by the
product user.
**********************************
Aluminium Chloride Anhydrous Manufacturers
Aluminum Chloride Anhydrous Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Aluminium Aluminum Chloride Anhydrous & Aluminium Chloride Hexahydrate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.