|
Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Formate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Sodium Formate Manufacturers MSDS Sheet
Sodium Formate
Technical & Pure Crystals
Sodium Formate MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Formic acid, sodium salt
CAS No.: 141-53-7
Molecular Weight: 68.01
Chemical Formula: HCOONa
2. Composition/Information on Ingredients
Ingredient: Sodium Formate
CAS No.: 141-53-7
Percent: 99 - 100%
3. Hazards Identification
Potential Acute Health
Effects: Sodium Formate very hazardous in case of ingestion. Hazardous
in case of skin contact (irritant), of eye contact (irritant), of
inhalation.
Potential Chronic Health Effects:
Very hazardous in case of ingestion.
Hazardous in case of skin contact (irritant), of eye contact (irritant), of
inhalation.
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
The substance is toxic to lungs, mucous membranes.
Repeated or prolonged exposure to the substance can produce target organs
damage.
Aggravation of Pre-existing Conditions: No information found.
4. First Aid Measures
Inhalation: Remove
to fresh air. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical
personnel. Never give anything by mouth to an unconscious person. Get
medical attention.
Skin Contact: After contact with skin, wash immediately with plenty
of water. Gently and thoroughly wash the contaminated skin with running
water and non-abrasive soap. Be particularly careful to clean folds,
crevices, creases and groin. Cold water may be used. Cover the irritated
skin with an emollient. If irritation persists, seek medical attention. Wash
contaminated clothing & Shoes before reusing.
Eye Contact: Check for and remove any contact lenses. Immediately
flush eyes with running water for at least 15 minutes, keeping eyelids open.
Cold water may be used. Do not use an eye ointment. Seek medical attention.
5. Fire Fighting Measures
Fire: Sodium Formate is not considered to be a
fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing
surrounding fire.
Special Information: In the event of a fire, wear full protective
clothing and NIOSH-approved self-contained breathing apparatus with full
face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste
disposal container. Finish cleaning by spreading water on the contaminated
surface and dispose of according to legal requirements.
Large Spill: Use a shovel to put the material into a
convenient waste disposal container. Finish cleaning by spreading water on
the contaminated surface and allow to drain.
7. Handling and Storage
Keep Sodium Formate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of Sodium Formate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions of the
contaminant at its source, preventing dispersion of it into the general work
area.
Personal Respirators (NIOSH Approved): For conditions of use
where exposure to dust or mist is apparent and engineering controls are not
feasible, a particulate respirator (NIOSH type N95 or better filters) may be
worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are
present, use a NIOSH type R or P filter. For emergencies or instances where the
exposure levels are not known, use a full-face positive-pressure, air-supplied
respirator.
Skin Protection: Wear protective gloves and clean body-covering
clothing.
Eye Protection: Maintain eye wash fountain and quick-drench
facilities in work area. Use chemical safety goggles and/or full face shield
where dusting or splashing of solutions is possible.
9. Physical and Chemical Properties
Appearance: Sodium Formate is white,
deliquescent, granules or crystalline powder.
Odor: Odorless to slight formic acid odor.
Solubility: 97 g/100 g water @ 20C (68F)
Density: 1.92 @ 20C
pH: 7.0-8.5 , conc: 1M at 20 C (solution)
% Volatiles by volume @ 21C (70F): 0.5
Boiling Point: Decomposes.
Melting Point: 253C (487F)
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Sodium Formate is hygroscopic.
Readily absorbs moisture from the air. Solutions are strong bases.
Hazardous Decomposition Products: At higher temperatures, substance
decomposes into sodium oxalate and hydrogen, then into sodium carbonate.
Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization: This substance does not polymerize.
Incompatibilities: Reacts with strong acids to form formic acid
fumes.
Conditions to Avoid: No information found.
11. Toxicological Information
Oral LD50 Mouse: 11200 mg/kg.
--------\Cancer Lists\------ ----------------------------------- ---------------------------- ---NTP Carcinogen--- Ingredient ----------------- Known - Anticipated - IARC Category ---------------------------- ----- - ----------- - ------------- Sodium Formate (141-53-7)--- - No ------- No ---------- None
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Sodium Formate in accordance with federal, state and local requirements.
14. Transport Information
Not regulated.
15. Regulatory Information
--------\Chemical Inventory Status - Part 1\-------------------- Ingredient ----------------- TSCA EC Japan Australia ---------------------------- ---- --- ----- --------- Sodium Formate (141-53-7) --- Yes Yes Yes Yes --------\Chemical Inventory Status - Part 2\-------------------- ----------------------------------- --Canada-- Ingredient ----------------- Korea DSL NDSL Phil. ---------------------------- ----- --- ---- ----- Sodium Formate (141-53-7) --- Yes Yes No Yes --------\Federal, State & International Regulations - Part 1\--- ---------------------------- -SARA 302- ------SARA 313------ Ingredient ----------------- RQ TPQ List Chemical Catg. ---------------------------- --- ----- ---- -------------- Sodium Formate (141-53-7) -- No No No No --------\Federal, State & International Regulations - Part 2\--- --------------------------------------- -RCRA- -TSCA- Ingredient ----------------- CERCLA 261.33 8(d) --------------------------- ------ ------ ------ Sodium Formate (141-53-7) --- No No No
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No
Reactivity: No (Pure / Solid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
US Federal and State Regulations: TSCA 8(b) inventory: Sodium formate
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
WHMIS (Canada): CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
DSCL (EEC):
R36/38- Irritating to eyes and skin.
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 1
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 2
Flammability: 1
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator
when ventilation is inadequate. Splash goggles.
16. Other Information
Disclaimer:
******************************
Our company provides this Sodium Formate MSDS information sheet contained
herein in good faith but makes no representation as to its comprehensiveness
or accuracy. This Sodium Formate MSDS sheet is
intended only as a guide to the appropriate precautionary handling of
the material by a properly trained person using this product. Individuals
receiving the information must exercise their independent judgment in
determining its appropriateness for a particular purpose.
******************************
Sodium Formate Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Sodium Formate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.