Mubychem Group, established in 1976, is the pioneer manufacturer of Potassium Bromide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Potassium Bromide BP Ph Eur USP ACS Grade Manufacturers
Potassium Bromide BP Ph Eur USP IP Manufacturers Technical
Potassium Bromide
Technical & Pure Crystals
CAS Number 7758-02-3, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Potassium Bromide BP Ph Eur Grade Specifications
DEFINITION
Content
98.0 per
cent to 100.5 per cent (dried substance).
CHARACTERS
Appearance
White or
almost white, crystalline powder or colourless crystals.
Solubility
Freely
soluble in water and in glycerol, slightly soluble in alcohol.
IDENTIFICATION
A. It gives
reaction of bromides.
B. Solution
S (see Tests) gives the reactions of potassium.
TESTS
Solution S
Dissolve
10.0 g in carbon dioxide-free water R prepared from distilled water R
and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S
is clear and colourless.
Acidity
or alkalinity
To 10 ml of
solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.5
ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is
required to change the colour of the indicator.
Bromates
To 10 ml of solution S add 1 ml of
starch solution R, 0.1 ml of a 100 g/l solution of potassium iodide and
0.25 ml of 0.5 M sulphuric acid and allow to stand protected from light
for 5 min. No blue or violet colour develops.
Chlorides
Maximum 0.6
per cent.
Iodides
To 5 ml of
solution S add 0.15 ml of ferric chloride solution and 2 ml of methylene chloride.
Shake and
allow to separate. The lower layer is colourless.
Sulphates
Maximum 100
ppm.
Iron
Maximum 20
ppm.
Magnesium and alkaline-earth metals
Maximum 200
ppm, calculated as Ca.
Heavy
metals
Maximum 10
ppm.
Loss on
drying
Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3h.
Potassium Bromide USP Grade Specifications
KBr 119.0
Potassium Bromide contains not less than 98.0 percent and not more than 100.5 percent of KBr, calculated on the dried basis. It contains no added substances.
Appearance of solution: clear and colorless.
Test
solution— Dissolve 10.0 g in carbon dioxide-free water, and dilute with the
same solvent to 100 mL.
Identification—
A: A
solution containing 4.5 mg of potassium bromide responds to the test for Bromide.
B:
Responds to the test for Potassium.
Acidity
or alkalinity— To 10 mL of the solution prepared for the test for Appearance of solution,
add 0.1 mL of bromothymol blue TS: not more than 0.5
mL of 0.01 N hydrochloric acid or 0.01 N sodium hydroxide is required to change
the color of this solution.
Loss on
drying— Dry it at 100 to 105 for 3 hours: it loses not more than 1.0% of its
weight.
Bromates—
Starch–mercuric iodide solution— Triturate 1.0 g of soluble starch with 5 mL
of water and pour the mixture into 100 mL of boiling water, containing 10 mg of
mercuric iodide.
Procedure—
To 10 mL of the solution prepared for the test for Appearance
of solution add 1 mL of Starch–mercuric iodide solution, 0.1 mL of a
100 g per L solution of potassium iodide, and 0.25 mL of 0.5 M sulfuric acid.
Allow to stand protected from light for 5 minutes: no blue or violet color
develops.
Limit of
chlorine: not more than 0.6%.
Iodides—
To 5 mL of the solution prepared for the test for Appearance of solution
add 0.15 mL of a 10.5 g per 100 mL ferric chloride solution, and 2 mL of
dichloromethane. Shake, and allow to separate. The lower layer is colorless.
Sulfates—
A 2.0-g portion shows no more sulfate than corresponds to 0.2 mL
of 0.020 N sulfuric acid (0.01%).
Limit of
iron: not more than 20 ppm.
Magnesium and alkaline-earth metals— (0.02%, calculated as Ca).
Heavy
metals: not more than 10 ppm.
Potassium Bromide ACS Reagent Grade Specifications
Reagent
Chemicals
ACS Specifications
Potassium Bromide
KBr
Formula Wt 119.00
CAS Number 7758-02-3
REQUIREMENTS
Assay: 99.0%
KBr
pH of a 5% solution: 5.0-8.8 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Bromate (BrO3): 0.001%
Iodate (IO3): 0.001%
Chloride (Cl): 0.2%
Iodide (I): 0.001%
Nitrogen compounds (as N) . 0.005%
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.002%
Magnesium (Mg): 0.001%
Sodium (Na): 0.02%
Potassium Bromide BP USP ACS Analytical Reagent manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Potassium Bromide IP BP USP ACS Analytical Reagent Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
29-Apr-2022