Mubychem Group, established in 1976, is the pioneer manufacturer of Ferric Chloride Hexahydrate Anhydrous, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Ferric Chloride Hexahydrate Anhydrous BP AR ACS Grade Manufacturers
For MSDS Sheet Click
Ferric Chloride Hexahydrate MSDS Sheet
Ferric Chloride Anhydrous MSDS Sheet
Ferric Chloride
Hexahydrate Anhydrous
CAS Number 10025-77-1 & 7705-08-0, BP Ph Eur ACS AR Grades
Ferric Chloride Hexahydrate BP Ph Eur Grade Specifications
FeCl3,6H2O -- 270.3 -- CAS Number 10025-77-1
DEFINITION
Content: 98.0 per cent to 102.0 per cent.
CHARACTERS
Appearance: Crystalline mass or orange-yellow or brownish-yellow crystals, very hygroscopic.
Solubility: Very soluble in water and in ethanol (96 per cent), freely soluble in glycerol.
IDENTIFICATION
A. It gives reaction of chlorides.
B. It gives reaction of iron.
TESTS
Solution S: Dissolve 10 g in distilled water and dilute to 100 ml with the same solvent.
Acidity: In a suitable polyethylene container, dissolve 3.0 g of potassium fluoride in 15 ml of water. Titrate with 0.1 M sodium hydroxide using 0.1 ml of phenolphthalein solution as indicator until a pink colour is obtained. Add 10 ml of solution S and allow to stand for 3 h. Filter and use 12.5 ml of the filtrate. Not more than 0.30 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to pink.
Free chlorine: Heat 5 ml of solution S. The vapour does not turn starch iodide paper blue.
Sulphates: Maximum 100 ppm.
Ferrous ions: Maximum 50 ppm.
Heavy metals: Maximum 50 ppm.
Ferric Chloride Hexahydrate ACS AR Analytical Reagent Grade Specifications
Iron(III) Chloride Hexahydrate
FeCl3-6H2O
Formula Weight 270.30
CAS Number 10025-77-1
| Assay | 97.0-102.0% FeCl3 . 6H2O |
MAXIMUM ALLOWABLE
| Insoluble matter | 0.01% |
| Nitrate (NO3) | 0.01% |
| Phosphorus compounds (as PO4) | 0.01% |
| Sulfate (SO4) | 0.01% |
| Copper (Cu) | 0.03% |
| Zinc (Zn) | 0.03% |
| Ferrous iron (Fe++) | Passes test |
| Substances not precipitated by ammonium hydroxide (as sulfates) | 0.1% |
Specifications of Ferric Chloride Anhydrous:
CAS Number 7705-08-0
Appearance: Greenish to Black, Crystalline powder
FeCl3 Assay: 98 %
Ferrous Salt as FeCl2: 0.10 % max
Insolubles: 0.50 % max.
Specific Gravity@25°C: 2.80
Molecular weight: 162.5
Melting Point: 282°C
Solubility: miscible in water.
Ferric Chloride Hexahydrate Anhydrous BP ACS grade Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Global or International Ferric Chloride Hexahydrate Anhydrous BP ACS AR Grade --- Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
29-Apr-2022